Pioneer VSX-1120-K User Manual download pdf (Page 37)

Basic Setup

•If Reverse Phase is displayed, the speaker’s wiring

(+ and –) may be inverted. Check the speaker

connections.

– If the connections were wrong, turn off the power,

disconnect the power cord, then reconnect properly.

After this, perform the Full Auto MCACC procedure

again.

– If the connections were right, select GO NEXT and

continue.

7 Make sure ‘

’ is selected, then press

ENTER

A progress report is displayed on-screen while the

receiver outputs more test tones to determine the

optimum receiver settings.

Again, try to be as quiet as possible while this is

happening. It may take 3 to 10 minutes.

8 The Auto MCACC Setup procedure is completed and

the

Home Menu

menu reappears automatically.

Be sure to disconnect the microphone from this receiver

upon completion of the Auto MCACC Setup.

The settings made in the Auto MCACC Setup should give

you excellent surround sound from your system, but it is

also possible to adjust these settings manually using The

Advanced MCACC menu on page 69 or The System Setup

and Other Setup menus on page 78.

Problems when using the Auto MCACC Setup

If the room environment is not optimal for the Auto

MCACC Setup (too much background noise, echo off the

walls, obstacles blocking the speakers from the

microphone) the final settings may be incorrect. Check

for household appliances (air conditioner, fridge, fan,

etc.), that may be affecting the environment and switch

them off if necessary. If there are any instructions

showing in the front panel display, please follow them.

• Some older TVs may interfere with the operation of

the microphone. If this seems to be happening,

switch off the TV when doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the Input Setup menu

if you didn’t hook up your digital equipment according to

the default settings (see Input function default and

possible settings on page 38). In this case, you need to

tell the receiver what equipment is hooked up to which

terminal so the buttons on the remote control

correspond to the components you’ve connected.

1 Press on the remote control, then press

HOME MENU

A Graphical User Interface (GUI) screen appears on your

TV.

Use /// and ENTER to navigate through the

screens and select menu items. Press RETURN to

confirm and exit the current menu.

2Select ‘

System Setup

’ from the

Home Menu

3Select ‘

Input Setup

’ from the

System Setup

menu.

4 Select the input function that you want to set up.

The default names correspond with the names next to the

terminals on the rear panel (such as DVD or VIDEO)

which, in turn, correspond with the names on the remote

control.

5 Select the input(s) to which you’ve connected your

component.

For example, if your DVD player only has an optical

output, you will need to change the DVD input function’s

Digital In setting from COAX-1 (default) to the optical

input you’ve connected it to. The numbering (OPT-1 to 3)

corresponds with the numbers beside the inputs on the

back of the receiver.

Note

1 If the speaker is not pointed to the microphone (listening position) or when using speakers that affect the phase (dipole speakers, reflective

speakers, etc.), Reverse Phase may be displayed even if the speakers are properly connected.

2 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches) will end up with

different size settings. You can correct the setting manually using the Manual speaker setup on page 78.

• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking

delay and room characteristics into account) and generally does not need to be changed.

• If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing environment, we recommend

adjusting the settings manually.

RECEIVER

A/V RECEIVER

Exit Return

a.Manual SP Setup

b. Input Setup

c. OSD Language

d. Network Setup

e. Other Setup

4.System Setup 4b.Input Setup

A/V RECEIVER

Exit Finish

Input : DVD

Input Name : Rename

Digital In : COAX-1

HDMI Input :

---

Input Skip : OFF

Component In : Comp-1

04he_Basic_setup.fm 37 ページ２０１０年３月１０日　水曜日　午後２時５１分

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 107 108

Comments to this Manuals

No comments

Pioneer VSX-1120-K User Manual Page 37

Comments to this Manuals

Related products and manuals for Acoustics Pioneer VSX-1120-K