Pioneer GM-D8400M Owner's Manual download pdf (Page 12)

11

Installation

Attaching the Bass boost remote

control

Attach with tapping screws (3 mm × 10 mm) at an

easily accessible location such as under the dash-

board.

Example of installation on the floor

mat or on the chassis

1. Place the amplifier where it is to be

installed. Insert the supplied tap-

ping screws (4 mm × 18 mm) into

the screw holes. Push on the screws

with a screwdriver so they make

marks where the installation holes

are to be located.

2. Drill 2.5 mm diameter holes at the

point marked, and install the ampli-

fier, either on the carpet or directly

to the chassis.

Tapping screw

(3 mm × 10 mm)

Drill a 2.5 mm diameter hole

Tapping screw

(4 mm × 30 mm)

Floor mat

or chassis

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 85 86

Comments to this Manuals

No comments