Pioneer VSX-1121-K User Manual download pdf (Page 51)

100

Using other functions

c ! This setting is valid for component outputs and

HDMI output.

! P.MOTION is disabled when PCINEMA is set to

ON.

! This setting have the effect only for pictures

recorded in the interlaced scan format (480i/576i or

1080i signals).

d Adjustment is not possible unless V.ADJ (Advanced

Video Adjust) is set to MEMORY.

e ! This setting is only displayed when the video

signals below are being input:

 — 480i, 576i, 480p, 576p, 720p, 1080i analog video

signals

 — 480i, 576i, 480p, 576p, 720p, 1080i, 1080p,

1080p24 HDMI video signals

f This adjustment is only possible when 480i signals

are being input from the composite video jacks.

g ! If the image doesn’t match your monitor type,

adjust the aspect ratio on the source component or

on the monitor.

! This setting is only displayed when 480i/p or 576i/p

video signals are being input.

Switching the speaker

terminals

If you selected Normal(SB/FH),

Normal(SB/FW) or Speaker B at Speaker

system setting on page 66 , you can switch

between speakers using the SPEAKERS button.

If you selected Front Bi-Amp or ZONE 2, the

button will simply switch your main speaker

terminals on or off.

% Use SPEAKERS on the front panel to

select a speaker system setting.

As mentioned above, if you have selected

Front Bi-Amp or ZONE 2, the button will simply

switch your main speaker terminal (A) on or off.

Press repeatedly to choose a speaker terminal

option:

When you select Normal(SB/FH), you can select

from:

! SP: SB/FH ON – Surround back or front height

channels are added to the front, center and

surround channels (maximum 5 channels)

and a maximum of 7 channels are output. The

surround back and front height channels are

switched automatically according to the audio

input signal.

! SP: SB ON – Surround back channels are

added to the front, center and surround

channels (maximum 5 channels) and a

maximum of 7 channels are output.

! SP: FH ON – Front height channels are added

to the front, center and surround channels

(maximum 5 channels) and a maximum of 7

channels are output.

! SP: OFF – No sound is output from the

speakers.

When you select Normal(SB/FW), you can select

from:

! SP: SB/FW ON – Surround back or front wide

channels are added to the front, center and

surround channels (maximum 5 channels)

and a maximum of 7 channels are output. The

surround back and front wide channels are

switched automatically according to the audio

input signal.

! SP: SB ON – Surround back channels are

added to the front, center and surround

channels (maximum 5 channels) and a

maximum of 7 channels are output.

! SP: FW ON – Front wide channels are added

to the front, center and surround channels

(maximum 5 channels) and a maximum of 7

channels are output.

! SP: OFF – No sound is output from the

speakers.

When you select Speaker B, you can select from:

! SP: A ON – Sound is output from the

A-speaker terminals (up to 7 channels

(including surround back channels),

depending on the source).

! SP: B ON – Sound is output from the two

speakers connected to the B-speaker

terminals. Multichannel sources will not be

heard.

! SP: A+B ON – Sound is output from the

A-speaker terminals (up to 5 channels,

depending on the source), the two speakers

connected to the B-speaker terminals, and

the subwoofer. The sound from the B-speaker

terminals will be the same as the sound

from the A-speaker terminals (multichannel

sources will be downmixed to 2 channels).

! SP: OFF – No sound is output from the

speakers.

Note

! The subwoofer output depends on the settings

you made in Manual speaker setup on page 66

. However, if SP: B ON is selected above, no

sound is heard from the subwoofer (the LFE

channel is not downmixed).

! All speaker systems (except

Speaker B connections) are switched off

when headphones are connected.

Using the MULTI-ZONE controls

The following steps use the front panel con-

trols to adjust the sub zone volume and select

sources. See MULTI-ZONE remote controls on

page 52 .

1 Press MULTI-ZONE ON/OFF on the

front panel.

Each press selects a MULTI-ZONE option:

! ZONE 2 ON – Selects your primary (ZONE 2)

sub zone

! MULTI ZONE OFF – Switches the MULTI-

ZONE feature off

The MULTI-ZONE indicator lights when the

MULTI-ZONE control has been switched ON.

2 Press MULTI-ZONE CONTROL on the

front panel to select the sub zone(s) you

want.

! When the receiver is on, make sure that any

operations for the sub zone are done while

ZONE and your selected sub zone(s) show in

the display. If this is not showing, the front

panel controls affect the main zone only.

If the receiver is in standby, the display is

dimmed, and ZONE and your selected sub

zone(s) continue to show in the display.

3 Use the INPUT SELECTOR dial to select

the source for the zone you have selected.

For example, ZONE 2 DVD sends the source

connected to the DVD inputs to the primary

(ZONE 2) sub room.

! If you select TUNER, you can use the tuner

controls to select a preset station (see Saving

station presets on page 32 if you’re unsure

how to do this). The tuner cannot be tuned to

more than one station at a time. Therefore,

changing the station in one zone also

changes the station in the other zone. Please

be careful not to change stations when

recording a radio broadcast.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Comments to this Manuals

No comments

Pioneer VSX-1121-K User Manual Page 51

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-1121-K