Pioneer VSX-29TX User Manual download pdf (Page 28)

STEREO

SIGNAL

SELECT

ANALOG

AUTO

VOLUME

3 Using the remote control display, follow the instructions

below to adjust the speaker levels so that you hear the

test tone at the same volume from each speaker when

seated in your normal listening position.

NOTE : The volume of the sub woofer tends to sound lower than it

actually is. You may need to adjust the level after testing with an actual

soundtrack.

In AUTO mode

1 Use the +/– (or %/ﬁ) buttons to adjust the level of the speaker

outputting the test tone. The tone will automatically switch between

speakers after sounding for 2-3 seconds.

2 Adjust the level of all speakers.

In MANUAL mode

1 Use the +/– (or %/ﬁ ) buttons to adjust the level of the first (the front

left) speaker.

2 Press the button on the touch panel for the next speaker.

3 Repeat 1 and 2 for each speaker.

If you are using a Sound Pressure Level (SPL) meter

Take the readings from your main listening position and adjust the

level of each speaker to 75 dB SPL (C-weighted/slow model).

4 When all the speaker levels have been set, select SETUP

OK to return to the SYSTEM SETUP MENU.

The display on the receiver will say RESUME and the MASTER

VOLUME will return to its original position.

Next, proceed to CROSSOVER NETWORK below.

initial Set Up

Note that it is also possible to set channel levels temporarily. Go to

the RECEIVER SUB screen and press CH LEVEL. Then follow the

same procedure as explained on this page. This function is

designed to be used when you want to change the levels

temporarily to hear one speaker louder. Using this method you can

set speaker levels in different modes, such as

Surround/dts,

STEREO, EXTERNAL DECODER and each DSP mode,

independently. You should return the settings to their original state

when done. Doing the set up procedures on this page will erase

any temporary/independent level settings that have been made.

memo

You can use the %¥ﬁ buttons at the bottom of the remote control

instead of the +/– buttons

memo

Channel Level

AUTO

TEST TONE

MANUAL

TEST TONE

SETUP

Channel Level

AUTO

TEST TONE

MANUAL

TEST TONE

SETUP

%¥ﬁ buttons

ENTER

DVD/LD

TV/SAT

VCR1

VCR2

STANDBY/ON

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

Comments to this Manuals

No comments

Pioneer VSX-29TX User Manual Page 28

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-29TX