Pioneer VSX-522-K User Manual download pdf (Page 32)

Home Menu

Confirm your selected setup option.

The test tones will start after you press

ENTER

. After the

volume increases to the reference level, test tones will be

output.

Adjust the level of each channel using

/

If you selected Manual, use

/

to switch speakers. The

Auto setup will output test tones in the order shown on-

screen:

Adjust the level of each speaker as the test tone is

emitted.

Note

•

If you are using a Sound Pressure Level (SPL) meter, take

the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow

reading).

•

The subwoofer test tone is output at low volumes. You may

need to adjust the level after testing with an actual

soundtrack.

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Tip

•

You can change the channel levels at any time by press

, then press

CH SELECT

and

LEV +/–

on the

remote control. You can also press

CH SELECT

and use

/



to select the channel, and then use

/

to adjust the

channel levels.

Speaker Distance

For good sound depth and separation from your system, you

need to specify the distance of your speakers from the

listening position. The receiver can then add the proper delay

needed for effective surround sound.

•

For the assignment of the digital signal inputs, see

Selecting the audio input signal

on page 20.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘Speaker Distance’ from the Manual SP Setup

menu.

Adjust the distance of each speaker using

/

You can adjust the distance of each speaker in 0.1 feet

increments.

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

The Input Assign menu

ANALOG IN1 audio input terminal is assigned to CD under

factory settings, but this can be changed to TV input.

Select ‘Input Assign’ from the Home Menu.

Select ‘Analog Input’ from the Input Assign menu.

Select the desired input option for the ANALOG IN1

audio input terminal.

When you’re finished, press

RETURN

You return to the Input Assign menu.

2c.Channel Level

Test Tone [ Manual ]

Please Wait . . .20

Caution

Loud test tones

will be output.

 Return

2c.Channel Level

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 0dB]

[ ––– ]

[ 0dB]

0dB

RECEIVER

2.Manual SP Setup

Return

a.Speaker Setting

b.X.Over

c.Channel Level

d.Speaker Distance

2d.Speaker Distance

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 10.0 ft ]

[ 10.0 tt ]

[ 10.0 ft ]

[ –––– ]

[ 10.0 ft ]

10.0 ft

Home Menu

1.Auto MCACC

2.Manual SP Setup

3.Input Assign

4.Pre Out Setting

5.Auto Power Down

6.FL Demo Mode

7.HDMI Setup

Return

3.Input Assign

Return

a.Analog Input

3a.Analog Input

Return

Analog

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39

Comments to this Manuals

No comments

Pioneer VSX-522-K User Manual Page 32

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-522-K