Pioneer VSX-D514 User Manual download pdf (Page 72)

Additional information

• If the unit does not operate normally due to external effects such as static electricity

disconnect the power plug from the outlet and insert again to return to normal operating

conditions.

Resetting the main unit

Use this procedure to reset all the receiver’s

settings to the factory default. Use the front

panel controls to do this.

1 Switch the receiver on.

2 While holding down the TONE button,

press and hold the



STANDBY/ON

button for about three seconds.

3 When you see RESET? appear in the

display, press the TONE button.

OK?

shows in the display.

4 Press TONE once more to confirm.

appears in the display to indicate that the

receiver has been reset to the factory default

settings.

Switching the speaker

impedance

We recommend using speakers of 8

Ω

with

this system, but it is possible to switch the

impedance setting if you plan to use speakers

with a 6

Ω

impedance rating.

• With the receiver in standby, press



STANDBY/ON while holding down the

SPEAKERS / SPEAKER IMPEDANCE button.

Each time you do this, you switch between the

impedance settings:

•

SP 6 OHM

– Use this setting if your

speakers are rated at 6

Ω

•

SP 8 OHM

– Use this setting if your

speakers are rated at 8

Ω

or more.

No sound is output or a noise

is output when software with

DTS is played back.

• Set the digital volume level of the player to full, or to the neutral

position.

When a search is performed

by a DTS compatible CD

player during playback, noise

is output.

• This is not a malfunction, but be sure to turn the volume down to

prevent the output of loud noise from your speakers.

Can’t operate the remote

control.

• Replace the batteries (refer to page 5).

• Operate within 7 m, 30° of the remote sensor on the front panel

(refer to page 6).

• Remove the obstacle or operate from another position.

• Avoid exposing the remote sensor on the front panel to direct light.

The display is dark or off. • Press

FL DIMMER

on the remote control repeatedly to return to

the default.

Problem

Remedy

VSX_514-814.fm 72 ページ２００４年３月２日　火曜日　午後８時３５分

1 2 ... 67 68 69 70 71 72 73 74 75

Comments to this Manuals

No comments

Pioneer VSX-D514 User Manual Page 72

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-D514