Pioneer BDP-LX88 User Manual download pdf (Page 57)

Control function

Sound is fast or slow. When an HDMI cable is

connected, are audio signals

being output from devices

connected with cables other

than HDMI cables?

When a Pioneer AV receiver or amplifier compatible with the PQLS

function is connected directly to the player’s HDMI OUT terminal using

an HDMI cable, the PQLS function is activated when playing an audio

CD (CD-DA). Because of this, the sound output from components other

than the ones connected by an HDMI cable may be fast or slow. If this

happens, set Control to Off (page 43).

After a disc is inserted,

Loading stays displayed and

playback does not start.

Are there too many files

recorded on the disc?

When a disc on which files are recorded is inserted, depending on the

number of files recorded on the disc, loading may take several dozen

minutes.

 is displayed in file names,

etc.

The characters that cannot be displayed on this player are displayed in

.

A message indicating low

memory appears while

playing a BD-ROM disc.

• Connect a USB device (page 21).

• Erase the data stored on the connected USB device from BUDA

Setup (page 45).

Problem Check Remedy

Control function does not

work.

Is the HDMI cable properly

connected?

To use the Control function, connect the TV and AV system (AV receiver

or amplifier, etc.) to the HDMI OUT terminal (page 16).

Is the HDMI cable you are

using a High Speed HDMI

Cable?

Use a High Speed HDMI

Cable. The Control function may not work

properly if an HDMI cable other than a High Speed HDMI

Cable is

used.

Is this player connected to

the TV using an HDMI cable

to watch the picture?

If video signals are being output from a terminal other than the HDMI

OUT terminal, the Control function does not work. Connect to the TV

using an HDMI cable (page 16).

Is the HDMI Mode set

appropriately?

• When connecting a device supporting the control function to the

HDMI OUT (MAIN) terminal, set the HDMI Mode to Dual or Single.

• When connecting a device supporting the control function to the

HDMI OUT (SUB) terminal, set the HDMI Mode to Separate or Pure

Audio (page 43).

Is Control set to On on the

player?

Set Control to On on the player (page 43).

Does the connected device

support the Control function?

• The Control function will not work with devices of other brands that

do not support the Control function, even when connected using an

HDMI cable.

• The Control function will not work if devices that do not support the

Control function are connected between the Control-compatible device

and the player. See page 17.

• Even when connected to a Pioneer product compatible with the

Control function, some of the functions may not work.

Also refer to the operating instructions for the connected device.

Is Control set to On on the

connected device?

Set Control to On on the connected device. The Control function

operates when Control is set to On for all devices connected to the

HDMI OUT terminal.

Once connections and settings of all the devices are finished, be sure

to check that the player’s picture is output to the TV. (Also, check after

changing the connected devices and connecting and/or disconnecting

HDMI cables.) If the player’s picture is not being output to the TV, the

Control function may not work properly.

For details, refer to the operating instructions of the connected device.

Are multiple players

connected?

The Control function may not work if 4 or more players, including this

player, are connected by an HDMI cable.

Depending on the connected device, the function may not work.

Problem Check Remedy

BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 57 ページ２０１４年９月９日　火曜日　午前１０時１４分

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments

Pioneer BDP-LX88 User Manual Page 57

Comments to this Manuals

Related products and manuals for Blu-Ray players Pioneer BDP-LX88