Pioneer DEQ-P7000 User Manual download pdf (Page 9)

Audio Adjustments

En

9

Using the dynamic range control

The dynamic range refers to the difference

between the largest and softest sounds. The

dynamic range control compresses this differ-

ence so that you can clearly hear sounds even

at low volume levels.

1 Press AUDIO to select DRC.

Press AUDIO until DRC appears in the display.

2 Press 5 to turn the dynamic range control

on.

DRC ON appears in the display. Dynamic range

control is now on.

• You can turn off dynamic range control by

pressing ∞.

Notes

• The dynamic range control is effective only on

Dolby Digital sounds.

• When playing other than the DVD disc, you

cannot switch this mode.

Using the dual mono mode

When playing a disc recorded on a dual mono

mode, you can select the channel to output.

1 Press AUDIO to select D.MONO.

Press AUDIO until D.MONO appears in the

display.

2 Press 2 or 3 to select the desired output

setting.

Press 2 or 3 until the desired output setting

appears in the display.

L&R (left and right channels)—Lch(left chan-

nel)—R ch (right channel)

Notes

• This function is effective only on dual mono

mode sound.

• When playing other than the DVD disc, you

cannot switch this mode.

Using the direct control

You can override audio settings to check for

effectiveness of your audio settings.

1 Press AUDIO to select DIRECT.

Press AUDIO until DIRECT appears in the

display.

2 Press 5 to turn the direct control on.

DIRECT ON appears in the display. Direct

control is now on.

• You can turn off direct control by pressing ∞.

Note

• All audio functions are locked out during

DIRECT ON except VOLUME.

Using the Dolby Pro Logic

Dolby Pro Logic gives enhanced spatial and

directional effects, creating theater-like sense of

presence and ambience.

• If the source is a 2-channel LPCM audio or a

2-channel Dolby Digital audio and you select

SFC effects that are most applicable for 5.1-

channel audio (i.e., Musical, Drama or

Action), we recommend switching Dolby Pro

Logic on. On the other hand, when selecting

SFC effects that are intended for use with 2-

channel audio (i.e., Jazz, Hall or Club), we

recommend switching Dolby Pro Logic off.

English

Español

Deutsch

Français

Italiano

Nederlands

02

Section

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 111 112

Comments to this Manuals

No comments