Pioneer AVH-5400DVD User Manual download pdf (Page 36)

System settings

Switching the auxiliary setting

Activate this setting when using an auxiliary

device connected to this unit.

1 Display the system menu.

Refer to Introduction of menu operations on

page 28.

2 Touch AUX Input on the system menu

to tur n AUX Input on or off.

Setting AV input

Activate this setting when using an external

video component connected to this unit.

1 Display the system menu.

Refer to Introduction of menu operations on

page 28.

2 Touch AV Input on the system menu to

turn AV Input on or off.

Setting the rear output and

subwoofer controller

This unit's rear speaker leads can be con-

nected with full-range speaker (Full) or sub-

woofer (Subwoofer). If you switch the rear

speaker setting to Subwoofer, you can con-

nect the lead directly to a subwoofer without

using an auxiliary amp.

! When no subwoofer is connected to the

rear output, select Full (full-range speaker).

! If the rear speaker leads are connected

with a subwoofer, select Subwoofer (sub-

woofer).

This unit's rear output (RCA rear output) can

be used for subwoofer (Subwoofer) or rear

(Rear Speaker) connection.

! When no subwoofer is connected to the

rear output, select Rear Speaker (Rear).

! When a subwoofer is connected to the rear

output, select Subwoofer (subwoofer).

1 Turn the unit off.

Refer to Basic operations of this unit on page

10.

2 Display the system menu.

Refer to Introduction of menu operations on

page 28.

3 Touch Rear Speaker on the system

menu.

Rear Speaker items are displayed.

# Rear Speaker – Adjust the rear speaker con-

nection.

# Preout – Adjust the preout connection.

4 Touch Rear Speaker item to select the

desired rear speaker setting appears.

# Rear Speaker can be set Full or Subwoofer.

# Preout can be set Subwoofer or Rear.

Notes

! Even if you change this setting, there will be

no output unless you turn the subwoofer out-

put on (refer to Using subwoofer output on

page 30).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

Setting the FM tuning step

Normally, the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to

100 kHz. It may be preferable to set the tuning

step to 50 kHz when AF is on.

! The tuning step remains at 50 kHz during

manual tuning.

1 Turn the unit off.

Refer to Basic operations of this unit on page

10.

2 Display the system menu.

Refer to Introduction of menu operations on

page 28.

En

36

Section

10

Menu operations

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Comments to this Manuals

No comments