Pioneer AVH-P3400DVD User Manual download pdf (Page 61)

System settings

Switching the auxiliary setting

Activate this setting when using an auxiliary

device connected to this unit.

1 Display the system menu.

Refer to Introduction of menu operations on

page 43.

2 Touch AUX Input on the system menu

to tur n AUX Input on or off.

Setting AV input

Activate this setting when using an external

video component connected to this unit.

1 Display the system menu.

Refer to Introduction of menu operations on

page 43.

2 Touch AV Input on the system menu to

turn AV Input on or off.

Setting the rear output and

subwoofer controller

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (Full) or subwoofer

(Subwoofer) connection. If you switch the

rear output setting to Subwoofer, you can

connect a rear speaker lead directly to a sub-

woofer without using an auxiliary amp.

Initially, the unit is set for a rear full-range

speaker connection (Full).

1 Turn the unit off.

Refer to Basic operations on page 10.

2 Press HOME to switch to the HOME dis-

play.

3 Touch System key.

System menu is displayed.

4 Touch Rear Speaker on the system

menu to switch the subwoofer output or

full-range speaker.

# When no subwoofer is connected to the rear

output, select Full (full-range speaker).

# When a subwoofer is connected to the rear

output, select Subwoofer (subwoofer).

Notes

! Even if you change this setting, there will be

no output unless you turn the subwoofer out-

put on (refer to Using subwoofer output on

page 45).

! Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this

setting.

Setting the FM tuning step

! The tuning step remains at 50 kHz during

manual tuning.

1 Turn the unit off.

Refer to Basic operations on page 10.

2 Display the system menu.

Refer to Introduction of menu operations on

page 43.

3 Touch FM Step on the system menu to

select the FM tuning step.

Touching FM Step will switch the FM tuning

step between 50 kHz and 100 kHz. The se-

lected FM tuning step will appear.

Switching sound muting/

attenuation

Sound from this system is automatically

muted or attenuated when a signal from

equipment with a mute function is received.

! Sound from this system returns to normal

when the muting or attenuation is can-

celed.

1 Display the system menu.

Refer to Introduction of menu operations on

page 43.

En

61

Section

12

Menu operations

Menu operations

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 111 112

Comments to this Manuals

No comments