Pioneer AVH-X7500BT User Manual download pdf (Page 15)

Opening and closing the

LCD panel

The LCD panel will open or close automatically

when the ignition switch is turned on or off.

You can turn off the automatic close/open

function.

! Do not close the LCD panel by force with

your hands. That will cause a malfunction.

! The automatic close/open function will op-

erate the display as follows.

— When the ignition switch is turned OFF

while the LCD panel is opened, the LCD

panel will close after six seconds.

— When the ignition switch is turned ON

again (or turned to ACC), the LCD panel

will open automatically.

— Removing or attaching the front panel

will automatically close or open the LCD

panel. (Refer to Pr otecting your unit from

theft on page 8.)

! When the ignition switch is turned OFF

after the LCD panel has been closed, turn-

ing the ignition switch ON again (or turning

it to ACC) will not open the LCD panel. In

this case, press OPEN/CLOSE to open the

LCD panel.

! When closing the LCD panel, check to

make sure that it has closed completely. If

the LCD panel has stopped halfway, leaving

it like this could result in damage.

CAUTION

Keep hands and fingers clear of the unit when

opening, closing, or adjusting the LCD panel. Be

especially cautious of children’s hands and fin-

gers.

% Press OPEN/CLOSE to open the LCD

panel.

# To close the LCD panel, press OPEN/CLOSE

again.

Setting the automatic open

function

To prevent the display from hitting the shift

lever of an automatic vehicle when it is in the

P (park) position, or when you do not wish the

display to open/close automatically, you can

set the automatic open function to manual

mode.

1 Press the home button to switch to the

home display.

2 Touch the system key to open the sys-

tem menu.

3 Touch Auto Flap to select whether to

open/close the display automatically or

manually.

Each time you touch Auto Flap the setting

switches between:

! On – The LCD panel will open or close auto-

matically when the ignition switch is turned

on or off.

! Off – You have to press OPEN/CLOSE to

open/close the LCD panel.

Turning the LCD panel horizontally

When the LCD panel is upright and hinders

the operation of the air conditioner, the panel

can be turned horizontally temporarily.

1 Press and hold OPEN/CLOSE to display

the flap menu.

2 Touch the flip down temporarily key to

flip the LCD panel down to the horizontal

position.

Flips the LCD panel down to the hori-

zontal position temporarily.

# To return to the original position, press and

hold OPEN/CLOSE.

# The LCD panel returns to the original position

automatically, indicated with a beeping sound 10

seconds after operation.

En

15

Section

05

Basic operations

Basic operations

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Comments to this Manuals

No comments