Pioneer AVH-X8500BT User Manual download pdf (Page 67)

7 Plug the microphone into the micro-

phone input jack on this unit.

8 Touch Start to start auto EQ.

9 When the 10-second countdown starts,

get out of the car and close the door within

10 seconds.

A measurement tone (noise) is emitted from

the speakers, and auto EQ measurement be-

gins.

When auto EQ is completed, The measure-

ment has finished. Please disconnect the

microphone and then push HOME key. is

displayed.

When the car’s interior acoustic characteris-

tics cannot be measured correctly, an error

message will be displayed. (Refer to Under-

standing auto EQ error messages on page 80.)

# It takes about nine minutes for auto EQ mea-

surement to be completed when all the speakers

are connected.

# To stop auto EQ, touch Stop.

10 Store the microphone carefully in the

glove compartment or another safe place.

If the microphone is subjected to direct sun-

light for an extended period, high tempera-

tures may cause distortion, color change or

malfunction.

Selecting the video format

You can switch the video output format of V

OUT between NTSC and PAL.

1 Press the home button to switch to the

home display.

2 Touch the system key to open the sys-

tem menu.

3 Touch Video Output Format on the sys-

tem menu to select the video output for-

mat.

NTSC—PAL

Note

You can switch the video output format only for

the source from this unit.

Setting the video signal

When you connect this unit to an AV equip-

ment to this unit, select the suitable video sig-

nal setting.

! As this function is initially set to Auto, the

unit will automatically adjust the video sig-

nal setting.

! You can operate this function only for the

video signal input into the AV input.

1 Press the home button to switch to the

home display.

2 Touch the system key to open the sys-

tem menu.

3 Touch Video Signal Setting on the func-

tion menu.

Video Signal Setting items are displayed.

! AV – Adjusts the AV video signal

! AUX – Adjusts the AUX video signal

! Camera – Adjusts the rear view camera

video signal

4 Touch c or d to select the desired

video signal appears.

Auto—PAL—NTSC—PAL-M—PAL-N—

SECAM

En

67

Section

17

System settings

System settings

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 99 100

Comments to this Manuals

No comments