Pioneer AVH-X8500BT User Manual download pdf (Page 7)

Installing the HDMI cable holder

% Position the HDMI cable holder to insert

its two lower tabs into the groove of this

product, and then tighten the screw (3 mm ×

5 mm) to fix the HDMI cable holder.

1

2

4

3

3

1 HDMI cable holder

2 Screw (3 mm × 5 mm)

3 Tab

4 Groove

! Use the HDMI cable holder when you con-

nect this product with the separately sold

App Connectivity Kit (CD-IH202/CD-AH200).

! Never grip the holder tightly or use force

when removing or attaching.

Notes

! Check all connections and systems before

final installation.

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires

drilling of holes or other modifications to the

vehicle.

! Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

! Do not install the display where it may (i) ob-

struct the driver’s vision, (ii) impair the per-

formance of any of the vehicle’s operating

systems or safety features, including air

bags, hazard lamp buttons or (iii) impair the

driver’s ability to safely operate the vehicle.

! The semiconductor laser will be damaged if

it overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 30°.

! When installing, to ensure proper heat dis-

persal when using this unit, make sure you

leave ample space behind the rear panel and

wrap any loose cables so they are not block-

ing the vents.

5cmcm

Leave ample

space

5 cm

5 cm

Before installing this unit

% Remove the holder.

1

1 Holder

(factory-supplied part)

Installation with the holder

1 Install the holder into the dashboard.

After inserting the holder into the dashboard, se-

lect and bend the tabs appropriate to the thick-

ness of the dashboard material. (Install this unit

as firmly as possible using the top and bottom

tabs. To secure this unit, bend the tabs 90 de-

grees.)

English

Connecting the units

7

Section

Installation

En

01

02

<YRD5375-A/N>7

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Comments to this Manuals

No comments