Pioneer AVIC-F320BT User Manual download pdf (Page 10)

Connecting the power cord (1)

ISO connector

Speaker leads

White: Front left 

White/black: Front left 

Grey: Front right 

Grey/black: Front right 

Green: Rear left  or Subwoofer  (*7)

Green/black: Rear left  or Subwoofer  (*7)

Violet: Rear right  or Subwoofer  (*7)

Violet/black: Rear right  or Subwoofer  (*7)

Depending on the kind of vehicle, the function

of *2 and *4 may be different. In this case, be

sure to connect *1 to *4 and *3 to *2.

Connect leads of the

same colour to each other.

Yellow (*2)

Back-up

(or accessory)

Red (*4)

Accessory

(or back-up)

Yellow (*1)

To terminal always supplied

with power regardless of

ignition switch position.

Red (*3)

To electric terminal controlled by

ignition switch (12 V DC) ON/OFF.

Orange/white

To lighting switch terminal.

Black (earth)

To vehicle (metal) body.

In some vehicles, the ISO connector may be divided

into two. In this case, be sure to connect to both

connectors.

Yellow/black

Vehicle can send a mute signal to this terminal.

Note

Notes

· When a subwoofer (*7) is connected to this

navigation system instead of a rear speaker, change

the rear output setting in the Initial Setting. (Refer to

Operation Manual.) The subwoofer output of this

navigation system is monaural.

· When using a subwoofer of 70 W (2 Ω), be sure to

connect with violet and violet/black leads of this

navigation system. Do not connect anything with

green and green/black leads.

Engb

Section

Connecting the System

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 143 144

Comments to this Manuals

No comments

Pioneer AVIC-F320BT User Manual Page 10

Comments to this Manuals

Related products and manuals for Car Multimedia Pioneer AVIC-F320BT