Pioneer AVIC-F840BT User Manual download pdf (Page 15)

Installing the navigation

system

Installation notes

! Do not install the navigation system in

places subject to high temperatures or hu-

midity, such as:

— Places close to a heater, vent or air con-

ditioner.

— Places exposed to direct sunlight, such

as on top of the dashboard.

— Places that may be exposed to rain,

such as close to the door or on the vehi-

cle’s floor.

! Install this navigation system in an area

strong enough to bear its weight. Choose a

position where this navigation system can

be firmly installed, and install it securely. If

this navigation system is not securely in-

stalled, the current location of the vehicle

cannot be displayed correctly.

! Install the navigation unit horizontally on a

surface within 0 to 30 degrees tolerance

(within 5 degrees to the lef t or right). Impro-

per installation of the unit with the surface

tilted more than these tolerances increases

the potential for errors in the vehicle's loca-

tion display, and might otherwise cause re-

duced display performance.

30°

5° 5°

! When installing, to ensure proper heat dis-

persal when using this unit, make sure you

leave ample space behind the rear panel

and wrap any loose cables so they are not

blocking the vents.

Leave ample

space

5 cm

5 cm

! The cords must not cover the area shown

in the figure below. This is necessary to

allow the amps and navigation mechanism

to dissipate heat.

Do not cover this area.

! The semiconductor laser will be damaged

if it overheats, so don’t install the naviga-

tion unit anywhere hot — for instance, near

a heater outlet.

Engb

15

English

Section

03

Installation

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 123 124

Comments to this Manuals

No comments