Pioneer AVIC-F930BT User Manual download pdf (Page 10)

Connecting the power cord (1)

ISO connector

Speaker leads

White: Front left 

White/black: Front left 

Grey: Front right 

Grey/black: Front right 

Green: Rear left  or Subwoofer  (*5)

Green/black: Rear left  or Subwoofer  (*5)

Violet: Rear right  or Subwoofer  (*5)

Violet/black: Rear right  or Subwoofer  (*5)

Depending on the types of vehicles, the

function of *2 and *4 may be different. In this

case, be sure to connect *1 to *4 and *3 to *2

as shown in the figure.

Connect leads of the

same colour to each other.

Yellow (*2)

Back-up

(or accessory)

Red (*4)

Accessory

(or back-up)

Yellow (*1)

To terminal supplied with

power regardless of ignition

switch position.

Red (*3)

To electric terminal controlled by

ignition switch (12 V DC) ON/OFF.

Orange/white

To lighting switch terminal.

Black (earth)

To vehicle (metal) body.

Note

Notes

· When a subwoofer (*5) is connected to this

navigation system instead of a rear speaker, change

the rear output setting in the initial setting. (Refer to

Operation Manual.) The subwoofer output of this

navigation system is monaural.

· When using a subwoofer of 70 W (2 Ω), be sure to

connect with violet and violet/black leads of this

navigation system. Do not connect anything with

green and green/black leads.

In some vehicles, the ISO connector may be divided

into two. In this case, be sure to connect to both

connectors.

Note

Engb

Section

Connecting the system

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Comments to this Manuals

No comments

Pioneer AVIC-F930BT User Manual Page 10

Comments to this Manuals

Related products and manuals for Car Multimedia Pioneer AVIC-F930BT