Pioneer AVIC-F930BT User Manual Page 187

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 186
Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 V to 14.4 V DC)
Earthing system ....................... Negative type
Maximum current consumption
........................................... 10.0 A
Dimensions (W × H × D):
DIN
Chassis ............................... 188 mm × 118 mm ×
157 mm
Nose ..................................... 170 mm × 96 mm × 20 mm
D
Chassis ............................... 178 mm × 100 mm ×
165 mm
Nose ..................................... 170 mm × 96 mm × 12 mm
Weight .......................................... 2.51 kg
NAND flash memory ............. 4GB
Navigation
GPS receiver:
System ................................ L1, C/Acode GPS
SPS (Standard Positioning
Service)
Reception system .......... 32-channel multi-channel
reception system
Reception frequency .... 1 575.42 MHz
Sensitivity .......................... 140 dBm (typ)
Position update frequency
........................................... Approx. once per second
GPS aerial:
Aerial ................................... Micro strip flat aerial/right-
handed helical polarisation
Aerial cable ...................... 3.55 m
Dimensions (W × H × D)
........................................... 33 mm × 15 mm × 36 mm
Weight ................................ 73.7 g
Display
Screen size/aspect ratio ....... 6.1 inch wide/16:9
(effective display area:
137 mm × 72 mm)
Pixels ............................................. 384 000 (800 × 480)
Display method ........................ TFT Active matrix driving
Backlight ..................................... LED
Colour system ........................... PAL/NTSC/SECAM compati-
ble
Tolerable temperature range:
Power on ............................ 10 °C to +60 °C
Power off ............................ 20 °C to +80 °C
Audio
Maximum power output ....... 50 W × 4
50 W × 2 ch/4 W +70W×
1 ch/2 W (for subwoofer)
Continuous power output ... 22 W × 4 (50 Hz to 15 kHz,
5 %THD, 4 W LOAD, Both
Channels Driven)
Load impedance ...................... 4 W (4 W to 8 W [2 W for 1 ch]
allowable)
Preout output level (max) .... 2.2 V
Preout impedance .................. 1kW
Equaliser (8-Band Graphic Equaliser):
Frequency .......................... 40 Hz/80 Hz/200 Hz/400 Hz/
1 kHz/2.5 kHz/8 kHz/10 kHz
Gain ...................................... ±12 dB
Loudness contour:
Low ....................................... +3.5 dB (100 Hz ), +3 dB
(10 kHz)
Mid ....................................... +10 dB (100 Hz), +6.5 dB
(10 kHz)
High ..................................... +11 dB (100 Hz), +11 dB
(10 kHz)
(volume: 30 dB)
HPF:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... 12 dB/oct
Subwoofer:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope .................................... 18 dB/oct
Gain ...................................... 24/+6 dB
Phase .................................. Normal/Reverse
Bass boost:
Gain ...................................... 0 dB to +12 dB
DVD Drive
System .......................................... DVD-Video, CD, MP3, WMA,
AAC, DivX system
Usable discs .............................. DVD-Video, DVD-R(DL),
DVD-RW, CD-ROM, CD-DA,
CD-R/RW
Region number ........................ 5
Signal format:
Sampling frequency ..... 44.1 kHz/48 kHz/96 kHz
Number of quantisation bits
........................................... 16 bit/20 bit/24 bit; linear
Frequency response ............... 5 Hz to 44 000 Hz (with DVD,
at sampling frequency
96 kHz)
Signal-to-noise ratio ............... 97 dB (1 kHz) (IEC-A net-
work)
(CD: 96 dB (1 kHz) (IEC-A
network))
Engb
187
Appendix
Appendix
Appendix
Page view 186

Comments to this Manuals

No comments