Pioneer AVIC-X1BT User Manual download pdf (Page 112)

110

Chapter 8

Customising the Audio Source Setting AV

❒ Rear View can be displayed at all times (e.g.

when monitoring an attached trailer, etc.) as a

split screen where map information is partially

displayed. Please be aware that in this setting,

camera image is not resized to fit, but that a

portion of what is seen by the camera is not

viewable.

❒ Initially, this function is set to OFF.

1 Touch “CAMERA” in the SETUP menu.

2 Touch “CAMERA” to turn rear view cam-

era setting on.

Touching “CAMERA” switches between

“ON” and “OFF”.

❒ Unless this setting is “ON”, you cannot

switch to Rear View mode.

3 Touch “POLARITY” to select an appropri-

ate setting for polarity.

Each time you touch “POLARITY” switches

between the following polarity:

• BATTERY — When the polarity of the con-

nected lead is positive while the gearstick is

in the REVERSE (R) position

• GND — When the polarity of the connected

lead is negative while the gearstick is in the

REVERSE (R) position

Selecting the video of rear dis-

play

When the navigation screen is displayed on front,

you can select to show either the navigation

screen or the selected source on the rear display.

❒ The map screen navigation images output to

the rear display differ from standard NTSC for-

mat images. Therefore, their quality will be

inferior to the images that appear on the front

display.

1 Touch “REAR DISP” in the SETUP menu.

Each touch of the “REAR DISP” changes the

settings as follows:

• SOURCE — Display the video of the

selected source on rear display

• NAVI — Display the navigation video on

rear display when the navigation screen is

displayed on front

❒ When selecting “SOURCE” in “REAR

DISP”, when the selected source is an

audio source, nothing is displayed on rear

display.

❒ When selecting “SOURCE” in “REAR

DISP”, nothing is displayed on rear dis-

play during a traffic announcement inter-

ruption or a news programme interruption.

❒ When selecting Rear View in the map dis-

play, nothing is displayed on the rear dis-

play.

Setting the slide back function

You can adjust the LCD panel slide position to

prevent the display from hitting the gearstick of

an automatic vehicle when it is in P (park) posi-

tion.

❒ Please be careful, as the LCD panel will slide

immediately after the setting is turned “ON”.

1 Touch “FLAP SET BACK” in the SETUP

menu.

Touching “FLAP SET BACK” switches

between “ON” and “OFF”.

Setting the automatic open

function

When you do not wish the display to open/close

automatically, you can set the automatic open

function to the manual mode.

1 Touch “AUTO FLAP” in the SETUP

menu.

Each touch of the “AUTO FLAP” changes

the settings as follows:

• MANUAL — You have to press the OPEN/

CLOSE button to open/close the display

• AUTO — The display automatically opens/

closes when power to navigation system is

turned on

Other Functions

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 154 155

Comments to this Manuals

No comments