Pioneer DEH-2210UB User Manual download pdf (Page 8)

REPEAT (repeat play)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on

the previous page.

3 Press M.C. to confirm the selection.

RANDOM (random play)

1 Press M.C. to turn random play on or off.

PAUSE (pause)

1 Press M.C. to pause or resume.

S.RTRV (sound retriever)

Automatically enhances compressed audio and re-

stores rich sound.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

For details, refer to Enhancing compressed audio

and restoring rich sound (sound retriever) on the

previous page.

3 Press M.C. to confirm the selection.

Note

Operation is complete even if the menu is can-

celled before being confirmed.

Audio Adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

FAD/BAL (fader/balance adjustment)

You can change the fader/balance setting.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader and balance.

3 Turn M.C. to adjust speaker balance.

Adjustment range (front/rear): F15 to R15

Adjustment range (left/right): L15 to R15

FR 0 is the prope r setting when only two speakers

are used.

EQUALIZER (equalizer recall)

There are six stored settings DYNAMIC (dynamic),

VOCAL (vocal), NATURAL (natural), CUSTOM (cus-

tom), FLAT (flat) and POWERFUL (powerful).

! When FLAT is selected no adjustments are made

to the sound.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM—

FLAT—POWERFUL

3 Press M.C. to confirm the selection.

TONE CTRL (equalizer adjustme nt)

You can adjust the bass/mid/treble level.

! Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press M.C. to display the setting mode.

2 Press M.C. to select BASS (bass)/MID (mid)/TRE-

BLE (treble).

3 Turn M.C. to adjust the level.

Adjustment range: +6 to -6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off)—LOW(low)—HIGH (high)

3 Press M.C. to confirm the selection.

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

! The MW/LW volume level can also be adjusted

with source level adjustments.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

3 Press M.C. to confirm the selection.

Notes

! When selecting FM as the source, you cannot

switch to SLA.

! Operation is complete even if the menu is can-

celled before being confirmed.

Operating this unit

Section

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 116 117

Comments to this Manuals

No comments

Pioneer DEH-2210UB User Manual Page 8

Comments to this Manuals

Related products and manuals for Car Multimedia Pioneer DEH-2210UB