Pioneer DEH-P88RS-II User Manual download pdf (Page 54)

Operation modes

This unit features two operation modes: the 3-

way network mode (NW) and the standard

mode (STD). You can switch between modes

as desired. Initially, the DSP setting is set to

the standard mode (STD). (Refer to Switching

the DSP setting mode on page 9.)

! The 3-way network mode (NW) lets you cre-

ate a 3-way multi-amp, multi-speaker sys-

tem with separate speakers for

reproduction of high, middle and low fre-

quencies (bands), each driven by a dedi-

cated power amp. The 3-way network mode

provides network and time alignment func-

tions, two functions essential for a multi-

amp, multi-speaker system, to enable pre-

cise control over settings for each fre-

quency range.

! The standard mode (STD) lets you create a

4-speaker system with front and rear speak-

ers, or a 6-speaker system with front and

rear speakers and subwoofers.

Important

Even when the battery is disconnected or the mi-

croprocessor is reset, this unit’s audio setting re-

mains in the memory for at least one day. If you

want to reset the audio setting, refer to Resetting

the audio functions on page 73.

Operation mode marks

This manual uses the following marks to make

the description clear.

: This mark indicates a function only in

NW mode or an operation in NW mode.

: This mark indicates a function available

only in STD mode or an operation in STD

mode.

! The functions and operations which do not

carry either mark are commonly used in

the NW and STD modes.

3-way network mode

Adjusting the audio easily

By carrying out the following settings/adjust-

ments in the order shown, you can create a fi-

nely-tuned sound field effortlessly.

1 Using the position selector (POSI)

2 Auto TA and EQ (auto-time alignment and auto-

equalizing)

3 Using balance adjustment

(BAL)

4 Recalling equalizer curves

Adjusting the audio finely

By carrying out the following settings/adjust-

ments in the order shown, you can create a fi-

nely-tuned sound field effortlessly.

1 Adjusting the time alignment (Low-Lch)

2 Adjusting network (NW 1, NW 2, NW 3)

3 Adjusting equalizer curves (EQ 1)

4 Adjusting 16-band graphic equalizer (EQ 2)

Standard mode

Adjusting the audio easily

The following functions let you easily adjust

your audio system to match the car interior

acoustic characteristics, which vary depend-

ing on the type of car.

1 Using the position selector (POSI)

2 Auto TA and EQ (auto-time alignment and auto-

equalizing)

3 Using balance adjustment

(F/B)

4 Recalling equalizer curves

Adjusting the audio finely

By carrying out the following settings/adjust-

ments in the order shown, you can create a fi-

nely-tuned sound field effortlessly.

1 Using subwoofer output (SW 1)

2 Adjusting subwoofer settings (SW 2)

Audio Adjustments

En

54

Section

12

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 179 180

Comments to this Manuals

No comments