Pioneer F77 Operations Manual Page 158

  • Download
  • Add to my manuals
  • Print
  • Page
    / 240
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 157
! Source:
Displays the video image output by the con-
nected external device.
! Camera:
Displays the image output by the connected
external camera.
p If Camera is selected, 2nd Camera
Input is automatically set to On.
p If Off or Source is selected, 2nd Cam-
era Input is automatically set to Off.
Setting the rear view camera
The following two functions are available. A se-
parately sold rear view camera (e.g. ND-BC6)
is required for utilising the rear view camera
function. (For details, consult your dealer.)
Rear view camera
This product features a function that automati-
cally switches to the full-screen image of the
rear view camera installed on your vehicle.
When the gearstick is in the REVERSE (R) po-
sition, the screen automatically switches to
full-screen rear view camera image.
p If the gearstick is aligned to the REVERSE
(R) position immediately after the system of
this product is started up, only the camera
image will be displayed and the parking as-
sist guidelines will not be displayed. The
parking assist guidelines will be displayed
on the camera image af ter a little while. Be
sure to check the conditions around the ve-
hicle even before the guidelines and the
message are displayed.
Camera for Camera View mode
Camera View can be displayed at all times
(e.g. when monitoring an attached trailer,
etc.). Please note that with this setting, the
camera image is not resized to fit, and that a
portion of what is seen by the camera is not
viewable.
CAUTION
Check to make sure settings for rear view camera
displays a mirror reversed image.
p Immediately verify whether the display
changes to a rear view camera image when
the gearstick is aligned to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
Camera Polarity.
Setting rear view camera
activation
p To view images of the rear view camera on
the screen of this product, Back Camera
Input needs to be set to On.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The System screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Back Camera Input] repeatedly
until the desired setting appears.
! Off (default):
Turns the back camera input setting off.
! On:
Turns the back camera input setting on.
Engb
158
Chapter
29
System settings
Page view 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 239 240

Comments to this Manuals

No comments