Pioneer HD1 Operations Manual download pdf (Page 139)

137

AV Chapter 14

Customising the Audio Setting related

with Audio Visual

❒ When a Pioneer external unit is connected

with an IP-BUS cable, select [EXT]. When

the audio source is [EXT], the “Video

image” of the Pioneer external unit can be

displayed.

Switching the auxiliary setting

It is possible to use auxiliary equipment with navi-

gation system as the one of source. Activate the

auxiliary setting when using auxiliary equipment

connected to the navigation system.

1 Touch [AUX Input] in the System Set-

tings menu.

Touching [AUX Input] switches between

[On] and [Off].

➲ “Selecting [AUX] as the source” ➞

Page 127

Switching the muting/attenua-

tion timing

You can select the audio source volume is muted

or attenuated what signal is output. This setting

is invalid for the mute signal has been received

from the CELLULAR MUTE lead connected to the

navigation unit. (Even if this setting is [Off], the

navigation system will mute or attenuate the

audio source volume, when the signal via CELLU-

LAR MUTE lead is output.)

1 Touch [Mute Set] in the System Settings

menu.

Each touch of [Mute Set] changes the set-

tings as follows:

• Guide/Tel/VR – The volume is muted or

attenuated by the following condition

– When the navigation outputs the guidance

voice.

– When you use a mobile phone via Bluetooth

technology (dialling, talking, incoming call).

– When the voice recognition mode is acti-

vated.

• Tel/VR – The volume is muted or attenu-

ated by the following condition

– When you use a mobile phone via Bluetooth

technology (dialling, talking, incoming call).

– When the voice recognition mode is acti-

vated.

• Off – The Volume does not change

❒ Operation returns to normal when the cor-

respond action is ended.

❒ Even when navigation voice guidance itself

cannot be attenuated or muted. If you want

to mute the navigation guidance voice

temporarily, use on the navigation map

screen.

Switching the muting/attenua-

tion level

You can select the muting/attenuation level of

[Mute Set]. This setting is also effected for the

mute signal has been received from the CELLU-

LAR MUTE lead connected to the navigation unit.

❒ This menu is not available in the following

cases:

– Audio source is [OFF]

– During muting/attenuation

1 Touch [Mute Level] in the System Set-

tings menu.

Each touch of [Mute Level] changes the set-

tings as follows:

• All – The volume becomes 0

• –20dB – The volume becomes 1/10

• –10dB – The volume becomes 1/3

❒ When you select [All], [Mute] is displayed

and no audio adjustments are possible

during the sound is turned off.

❒ When you select [–20dB] or [–10dB], no

audio adjustments, except volume control,

are possible during the sound is attenu-

ated.

❒ Operation returns to normal when the cor-

respond action is ended.

❒ Even when a mute signal has been

received from the CELLULAR MUTE lead

connected to the navigation unit, naviga-

tion voice guidance cannot be attenuated

or muted. If you want to mute the naviga-

tion guidance voice temporarily, use on

the navigation map screen.

MAN-HD1BT-SOFTW-EN.book Page 137 Thursday, April 20, 2006 3:47 PM

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 191 192

Comments to this Manuals

No comments