Pioneer AVH-P7800DVD User Manual download pdf (Page 90)

When front speaker HPF is selected in the

network mode

Parameter What it does

FREQUENCY

Selects cut-off frequencies in the fol-

lowing order:

50—63—80—100—125—160—

200 (Hz)

SLOPE

Selects slopes in the following order:

–18— –12— –6 (dB/oct.)

To switch the filter of the front speaker between LPF and

HPF, touch HIGH PASS or LOW PASS.

When front speaker LPF is selected in the

network mode

Parameter What it does

FREQUENCY

Selects cut-off frequencies in the fol-

lowing order:

1.25k—1.6k—2k—2.5k—3.15k—

4k—5k—6.3k—8k—10k—12.5k

(Hz)

SLOPE

Selects slopes in the following order:

–12— –6—0 (pass) (dB/oct.)

# You can mute the selected speaker unit by

touching MUTE OFF. To cancel muting, touch

MUTE ON.

Notes

! Selecting cut-off frequencies sets cut-off fre-

quencies of the subwoofer’s L.P.F. (low-pass

filter) and that of the SMALL speaker H.P.F.

(high-pass filter). The cut-off frequency setting

has no effect if the subwoofer is set to OFF

and other speakers are set to LARGE or OFF.

! If trying to boost the bass output of the sub-

woofer doesn’t do much or rather makes you

feel that the bass gets more murky, this may

indicate that the subwoofer’s output and bass

content you hear over other speakers cancel

each other out. To remove this problem, try

changing the phase setting for the subwoofer.

! You can store the adjusted setting in memory

by using MEMORY. For details concerning op-

eration, refer to Storing the adjusted audio set-

tings in memory on page 93.

Using the time alignment

The time alignment lets you adjust the dis-

tance between each speaker and the listening

position.

Recalling time alignment settings

% Touch TIME ALIGNMENT on the sound

setting menu to select the time alignment.

Touch TIME ALIGNMENT repeatedly to switch

between the following time alignment set-

tings:

INITIAL—AUTO—CUSTOM1—CUSTOM2—

CUSTOM3—LAST MEMORY—OFF

# You can select LAST MEMORY only when the

adjusted time alignment setting is not memorized

in this unit.

# You cannot select AUTO when NETWORK

has been selected. (Refer to Switching the DSP

setting mode on page 105.)

# When STANDARD has been selected, you

cannot select AUTO if auto TA and EQ has not

been carried out.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

! An adjusted time alignment can be memor-

ized in CUSTOM1, CUSTOM2 or

CUSTOM3.

1 Recall the time alignment setting you

want to adjust.

Refer to Recalling time alignment settings on

this page.

Audio Adjustments

En

90

Section

17

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 130 131

Comments to this Manuals

No comments