Pioneer DEH-P700BT User Manual download pdf (Page 49)

3 Press MULTI-CONTROL to turn the off

clock display on.

# To turn the off clock display off, press

MULTI-CONTROL again.

Setting the FM tuning step

Normally the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to 100

kHz. It may be preferable to set the tuning step

to 50 kHz when AF is on.

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select FM STEP.

3 Press MULTI-CONTROL to select the FM

tuning step.

Pressing MULTI-CONTROL repeatedly will

switch the FM tuning step between 50 kHz

and 100 kHz. The selected FM tuning step will

appear in the display.

Note

The tuning step remains at 50 kHz during manual

tuning.

Switching Auto PI Seek

The unit can automatically search for a differ-

ent station with the same programming, even

during preset recall.

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select AUTO PI.

3 Press MULTI-CONTROL to turn Auto PI

seek on.

# To turn Auto PI seek off, press

MULTI-CONTROL again.

Switching the warning tone

If the front panel is not detached from the

head unit within four seconds of turning off

the ignition, a warning tone sounds. You can

turn off the warning tone.

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select

WARNING.

3 Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press

MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be

activated individually. Set each AUX source to

ON when using. For more information about

connecting or using auxiliary devices, refer to

Using the AUX source on page 53.

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select AUX1/

AUX2.

3 Press MULTI-CONTROL to turn AUX1/

AUX2 on.

# To turn AUX off, press MULTI-CONTROL

again.

Initial Settings

En

49

Section

04

Initial Settings

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Comments to this Manuals

No comments