Pioneer DEH-P77MP User Manual download pdf (Page 38)

Introduction of audio

adjustments

21

1 EQ indicator

Shows when the equalizer curve other than

flat is selected.

2 Audio display

Shows the audio adjustments status.

% Press AUDIO to display the audio func-

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

FADER (fader adjustment) BAL (balance ad-

justment)BASS (bass level adjustment)

TREBLE (treble level adjustment)LOUD

(loudness)SUB.W (subwoofer on/off set-

ting)/NonFAD (non fading output on/off set-

ting)80Hz (subwoofer setting)/NonFAD

(non fading output setting)HPF (high pass

filter)SLA (source level adjustment)ASL

(automatic sound levelizer)

# When the subwoofer controller setting is only

PREOUT:FUL, you cannot switch to SUB.W.

(Refer to page 44.)

# You can select the 80Hz only when subwoofer

output is turned on in the SUB.W.

# When the subwoofer controller setting is only

PREOUT:FUL, you can switch to the non fading

output on/off setting. (Refer to page 44.)

# You can select the non fading output setting

only when non fading output is turned on in the

non fading output on/off setting.

# When selecting the FM tuner as the source,

you cannot switch to SLA.

# To return to the display of each source, press

BAND.

Note

If you do not operate the audio function within

about 30 seconds, the display is automatically re-

turned to the source display.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

Adjusting front/rear balance

1 Press AUDIO to select FADER.

Press AUDIO until FADER appears in the dis-

play.

2 Rotate ROTARY ENCODER to adjust

front/rear speaker balance.

Rotating ROTARY ENCODER moves the front/

rear speaker balance towards the front or the

rear.

FADER :F15  FADER :R15 is displayed as the

front/rear speaker balance moves from front to

rear.

# FADER : 0 is the proper setting when only two

speakers are used.

# When the rear output setting is REAR SP:S/W,

you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer

controller on page 44.

Adjusting left/right balance

1 Press AUDIO to select BAL.

Press AUDIO until BAL appears in the display.

Audio Adjustments

En

38

Section

11

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 111 112

Comments to this Manuals

No comments