Pioneer DEH-P7900UB User Manual download pdf (Page 12)

ENGLISH

Operating this unit

Non-RDS or MW/LW

1. Press SOURCE to select the tuner.

2. Press BAND to select a band.

Press BAND until the desired band is displayed, FM-1, FM-2, FM-3 for FM or MW/LW.

3. To perform manual tuning, push MULTI-CONTROL left or right.

4. To perform seek tuning, push and hold MULTI-CONTROL left or right for about

one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception

is found.

• You can cancel seek tuning by pushing MULTI-CONTROL left or right.

• If you push and hold MULTI-CONTROL left or right you can skip stations. Seek

tuning starts as soon as you release MULTI-CONTROL.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast frequencies for later recall.

• Up to 18 FM stations, six for each of the three FM bands, and six MW/LW stations

can be stored in memory.

1. When you find a frequency that you want to store in memory press LIST.

2. Use MULTI-CONTROL to store the selected frequency in memory.

Turn to change the preset number; press and hold to store.

The preset number you have selected will flash and then remain lit. The selected radio

station frequency has been stored in memory.

햲 Band indicator

햳 Stereo (%) indicator

Shows when the selected frequency is

being broadcast in stereo.

햴 LOC indicator

Shows when local seek tuning is on.

햵 Preset number indicator

햶 Signal level indicator

Shows the radio wave strength.

햷 Frequency indicator

3. Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

• You can also change the station by pushing MULTI-CONTROL up or down.

• If you do not operate the list within about 30 seconds, the display is automatically

returned to the ordinary display.

Using the remote control

* When you find a frequency that you want to store in memory, press one of preset

tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then

remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same preset tuning button the radio station frequency is

recalled from memory.

• You can also recall radio station frequencies assigned to preset tuning numbers by

pushing MULTI-CONTROL up or down during the frequency display.

Introduction of advanced operations

1. Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2. Use MULTI-CONTROL to select FUNCTION.

Turn to change the menu option; press to select.

The function name appears on the display.

3. Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL to switch between the functions in the following order:

BSM (best stations memory) – Regional (regional) – Local (local seek tuning) – PTY

search (program type selection) – Traffic Announce (traffic announcement standby)

– Alternative FREQ (alternative frequencies search) – News interrupt (news

program interruption)

• You can also select the function by pressing FUNCTION on the remote control.

• If MW/LW band is selected, you can only select BSM or Local.

• To return to the frequency display, press BAND.

• If you do not operate functions within about 30 seconds, the display is automatically

returned to the ordinary display.

MAN-DEH-P7900UB-GB.fm Page 12 Wednesday, February 21, 2007 11:20 AM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments

Pioneer DEH-P7900UB User Manual Page 12

Comments to this Manuals

Related products and manuals for Car radio Pioneer DEH-P7900UB