Pioneer DVH-P500UB User Manual download pdf (Page 51)

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Press SOURCE and hold until the unit

turns off.

2 Press MULTI-CONTROL and hold until

the initial setting menu appears in the dis-

play.

3 Turn MULTI-CONTROL to select one of

the initial settings.

Turn MULTI-CONTROL to switch between the

functions in the following order.

CLOCK (clock)—OFF CLOCK (off clock)—

FM STEP (FM tuning step)—AUTO PI (auto PI

seek)—WARNING (warning tone)—AUX1

(auxiliary input1)—AUX2 (auxiliary input2)—

VIDEO IN (AV input setting)—CAMERA (rear

view camera setting)—ILLUMI (illumination

color)—REAR SP (rear output and subwoofer

controller)—EVERSCROLL (ever scroll)—TITLE

(multi language)—TV SIGNAL (TV signal set-

ting)—D.ATT (digital attenuation)—

AUDIO RESET (audio reset)

Use the following instructions to operate each

particular setting.

# You can also select the function by pressing

FUNCTION on the remote control.

# To cancel initial settings, press BAND.

# When you select CAMERA (rear view camera)

in VIDEO IN, you can select CAMERA (rear view

camera setting).

# When the multi-channel processor (e.g., DEQ-

P6600) is connected to this unit, you can operate

D.ATT and AUDIO RESET instead of REAR SP.

Setting the clock

Use these instructions to set the clock.

1 Use MULTI-CONTROL to select CLOCK.

Refer to Adjusting initial settings on this page.

2 Push MULTI-CONTROL left or right to

select the segment of the clock display you

wish to set.

Pushing MULTI-CONTROL left or right will se-

lect one segment of the clock display:

Hour—Minute

As you select segments of the clock display,

the selected segment blinks.

3 Push MULTI-CONTROL up or down to

put a clock right.

Note

You can match the clock to a time signal by

pressing MULTI-CONTROL.

! If 00 to 29, the minutes are rounded down.

(e.g., 10:18 becomes 10:00.)

! If 30 to 59, the minutes are rounded up. (e.g.,

10:36 becomes 11:00.)

Turning the off clock display on

or off

If the off clock display is turned on, the clock

appears on the display when the sources are

off.

1 Use MULTI-CONTROL to select

OFF CLOCK.

Refer to Adjusting initial settings on this page.

2 Press MULTI-CONTROL to turn the off

clock display on.

# To turn the off clock display off, press

MULTI-CONTROL again.

Operating this unit

En

51

Section

02

Operating this unit

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 95 96

Comments to this Manuals

No comments