Pioneer AVIC 505 Installation Guide download pdf (Page 9)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Connecting the power cord (1)

Mobile Navigation Unit

AVIC-505

+ Battery

To the terminal always supplied with power regardless of

ignition switch position.

Fuse holder (6 A)

ACC

To the electric terminal controlled by the ignition switch

(12 V DC) ON/OFF.

Do not connect this lead to power source terminals to

which power is continuously supplied. If the lead is

connected to such terminals, the battery may be drained.

ILL

To lighting switch terminal.

GROUND

To vehicle (metal) body. To keep electromagnetic noise

from the vehicle body out of the mobile navigation system,

attach this lead near the main unit.

Black

Fuse resistor

Orange

Fuse resistor

Red

Yellow

Note: The orange, red, and yellow leads should be

connected to the opposite side of the fusebox terminals

from the battery.

Yellow/Black, Purple, Pink, Blue/Yellow

Note: When replacing the fuse, be

sure to use only a fuse of the rating

prescribed on the fuse holder.

Power cord

See next page.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 147 148

No comments

Pioneer AVIC 505 Installation Guide Page 9