Pioneer AVH-P4100DVD User Manual download pdf (Page 43)

Custom Custom

Flat Flat

Super Bass Super bass

# Custom is an adjusted equalizer curve that

you create. If you make adjustments to an equali-

zer curve, the equalizer curve setting is memor-

ized in Custom.

# When Flat is selected, no supplement or cor-

rection is made to the sound. This is useful to

check the effect of the equalizer curves by switch-

ing alternatively between Flat and a set equalizer

curve.

3 Touch c or d on Band to select the

equalizer band to adjust.

Low (low)—Mid (mid)—High (high)

4 Touch c or d on Frequency to select

the frequency to adjust.

Low: 40Hz—80Hz—100Hz—160Hz

Mid: 200Hz—500Hz—1kHz—2kHz

High: 3.15kHz—8kHz—10kHz—12.5kHz

5 Touch c or d on Q.Factor to select the

Q factor.

2Wide—1Wide—1Narrow—2Narrow

6 Touch a or b to adjust the level of the

equalizer band.

+12 to –12 is displayed as the level is in-

creased or decreased.

# You can then select another band and adjust

the level.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Touch Loudness on the audio function

menu.

2 Touch d to turn loudness on.

# To turn loudness off, touch c.

3 Touch c or d to select a desired level.

Low (low)—Mid (mid)—High (high)

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

! When the subwoofer output is on, you can

adjust the cut-off frequency and the output

level of the subwoofer.

1 Touch Subwoofer on the audio function

menu.

2 Touch d next to Subwoofer to turn sub-

woofer output on.

# To turn subwoofer output off, touch c.

3 Touch c or d next to Phase to select

the phase of subwoofer output.

Touch d to select normal phase and Normal

appears in the display. Touch c to select re-

verse phase and Reverse appears in the dis-

play.

4 Touch c or d next to Level to adjust

the output level of the subwoofer.

+6 to –24 is displayed as the level is increased

or decreased.

5 Touch c or d next to Frequency to se-

lect cut-off frequency.

Each time you touch c or d selects cut-off fre-

quencies in the following order:

50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se-

lected range are outputted from the sub-

woofer.

Boosting the bass

Bass boost function boosts the bass level of

sound.

1 Touch Bass Booster on the audio func-

tion menu.

2 Touch c or d to select a desired level.

0 to +6 is displayed as the level is increased or

decreased.

Audio Adjustments

En

43

Section

13

Audio Adjustments

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 115 116

Comments to this Manuals

No comments