Pioneer DVD-V8000 User Manual download pdf (Page 67)

Operating Modes

The player allows/displays up to 320 characters (32 characters per line with

10 lines available). Follow the instructions below to create a User’s Display:

1. Select User's Display in Register A

2. Set the display data using a print character command

3. Turn display switch ON

Execution :

String Status Return DVD player

1DS<CR> R<CR> Display Off to Display On

Only Frame number is displayed

1RA<CR> R<CR>

6.14 Register D Set

Function : current setting of Register D is rewritten

Format : Integer RD

Explanation : Register D contains the termination setting of the serial

communication (RS232). There are two choices, “CR” or “CR + LF”. The

default for Register D is 0.

Argument Function

0 (default) CR

64 CR + LF

6.15 Print Character

Function : Characters are written into the User's Display Area

(Not to be issued simultaneously with other commands)

Format : Integer PR <CR>

Character string <CR>

Explanation : The command writes a character string for one line into the User

Display Area (turn ON the User Display Specification in Register A).

Follow the instructions listed below to create printed characters.

1. Specify the line number using an integer in the range 0 ~ 9

2. Enter the command character PR

3. Enter the terminate code <CR>

4. Specify the character string to enter in the next command string

(enter a character string up to 32 characters in length)

- 60

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 110 111

No comments

Pioneer DVD-V8000 User Manual Page 67