Pioneer P1 User Manual download pdf (Page 11)

Connecting your equipments

3 Connect the other ends of the cables to the terminals of

speakers (make sure the positive and negative (+/–)

terminals on the speakers match those on the stereo

receiver).

CAUTION

• These speaker terminals carry

HAZARDOUS LIVE voltage

To prevent the risk of electric shock when connecting or

disconnecting the speaker cables, disconnect the power

cord before touching any uninsulated parts.

• Do not mistake the right and the left channels. The right

speaker is the one on the right side when you face the unit.

• Do not let the bare speaker wires touch each other.

• Make sure that all the bare speaker wire is twisted

together and inserted fully into the speaker terminal. If

any of the bare speaker wire touches the back panel, it

may cause the power to cut off as a safety measure.

Controlling the unit using a remote control of

other Pioneer component

This unit can be controlled using a remote control of other

Pioneer component if the

stereo

receiver is connected to the

component with a monaural mini-plug cord (commercially

available).

Using other subwoofer

You can connect a subwoofer with an amplifier to the

SUBWOOFER OUT socket.

Note

• No sound is output from the subwoofer without a built-in

amplifier.

Connecting a network audio device

You can connect a network audio device to the stereo

receiver using a RCA audio cable (commercially available).

Note

• To select NETWORK input;

On remote control: Press the NETWORK button, or press

the INPUT button repeatedly until NETWORK is displayed

in the front panel display.

On stereo receiver: Turn the SOURCE knob until

NETWORK is displayed in the front panel display.

Connecting digital audio device

You can connect a digital audio device to the stereo receiver

using an optical or coaxial cable (commercially available).

Note

• To select digital input;

On remote control: Press the DIG IN 1/2 button

repeatedly, or press the INPUT button repeatedly until

DIGITAL IN 1 (for optical input) or DIGITAL IN 2 (for

coaxial input) is displayed in the front panel display.

On stereo receiver: Turn the SOURCE knob until DIGITAL

IN 1 (for optical input) or DIGITAL IN 2 (for coaxial input)

is displayed in the front panel display.

• Digital signal formats that can be input to the stereo

receiver include linear PCM signals with sampling rate

and quantitative bits up to 192 kHz/24 bits. (Depending on

the connected device and environment, operation may

not be successful).

ANTENNA

Stereo receiver

(XC-P01 for

example)

Audio cable

(commercially

available)

To audio input

socket

To SUBWOOFER OUT

socket

Commercially

available subwoofer

(amplifier built in)

ANTENNA

ANALOG

AUDIO OUTPUT

Audio cable

(commercially

available)

Stereo

receiver

(XC-P01 for

example)

Network audio player

DIGITAL OUT

COAXIAL

OPTICAL

Coaxial cable (commercially

available)

Optical cable

(commercially available)

Digital recording device

Stereo receiver

Digital recording device

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Comments to this Manuals

No comments

Pioneer P1 User Manual Page 11

Comments to this Manuals

Related products and manuals for CD players Pioneer P1