Pioneer DV-525 Operations Instructions download pdf (Page 54)

Audio is not output or is distorted.

The Setup screen Audio 1 menu [96 kHz PCM Out]

setting is set to “96 kHz”. Digital output is prohibited

on some discs.

\ Be sure to make analog audio connections as well

as digital connections (pages 15 and 16).

The disc is dirty.

\ Refer to “Disc Care” (page 49).

The connection plugs are not inserted fully into the

terminals or are not connected.

\ Check that all connection plugs are firmly inserted.

The connection plug or terminal is dirty.

\ Check that the plugs and terminals are wiped

clean of dirt, etc.

Audio cable connection is wrong.

\ Check to make sure that the audio cables are

connected correctly (page 16).

Connection is made to the stereo amplifier‘s PHONO

input terminal.

\ Change connection to any input terminal except

PHONO.

The pause mode is engaged.

\ Press PLAY 3 or PAUSE 8 to exit the pause

mode.

Stereo amplifier operation is incorrect.

\ Check input (CD, AUX, etc.) selector to determine

if it is selected for DVD playback.

The DVD or CD is recorded in DTS audio.

\ DTS audio is only output from the digital output

jacks. Connect the digital output on the player to

the digital input on a receiver or amplifier with a

built in DTS decoder to hear DTS audio.

Noticeable difference in DVD and CD volume.

DVDs and CDs use different recording methods.

\ This is not a malfunction.

Caution

Static electricity or other external influence may cause

malfunctioning of this unit. In this case, unplugging

the power cord and then re-plugging it in will usually

reset the unit for proper operation. If this does not

correct the problem, please consult your nearest

PIONEER service center.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

No comments

Pioneer DV-525 Operations Instructions Page 54