Pioneer DV-LX50 User Manual download pdf (Page 43)

English

No audio, or audio is distorted. • No audio is output during slow motion playback or when scanning discs other than Audio CDs and

SACDs.

• Some DVD discs do not output digital audio: Switch your amplifier to the player’s analog outputs.

• Check that the disc is free from dust and dirt, and that it is not damaged (page 40).

• Check that all interconnects are firmly inserted.

• Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the

cable for damage.

• Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.

• Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).

The analog audio is OK, but there

appears to be no digital audio

signal.

• Make sure that the Digital Out (page 32) is set to On.

•Check that the Dolby Digital Out, DTS Out and MPEG Out (page 32) are suitable for your amplifier/

receiver — check the instruction manual that came with your amplifier/receiver.

• SACDs and some DVD-Audio discs do not output digital audio. Listen through the player’s analog

audio outputs.

•Check that the PURE AUDIO indicator is not lit. If it is, press the PURE AUDIO button (See also

Front

panel on page 16).

Noticeable difference in DVD and CD

volume.

• This is due to differences in the audio format and is not a malfunction.

Cannot play multi-channel audio. • Make sure that Audio Output Mode (page 36) is set to 5.1 Channel.

•Check that the Dolby Digital Out, DTS Out and MPEG Out (page 32) are suitable for your amplifier/

receiver—check the instruction manual that came with your amplifier/receiver.

• DVD-Audio and SACDs do not output multichannel digital audio. Listen through the player’s analog

outputs.

• Check that the settings in the Speaker Installation screen are correct (page 34).

• Check the audio options available from the disc menu.

Cannot listen to high-sampling rate

audio through the digital output.

• Make sure that Linear PCM Out (page 32) is set to Down Sample Off.

• As a copy-protection measure, some DVDs do not output 96 kHz audio. In this case, even if set to

Down Sample Off, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

Cannot output 192 kHz or 176.4 kHz

digital audio.

• The player does not output digital audio at these sampling rates. The digital output is automatically

downsampled.

Cannot output 96 kHz or 88.2 kHz

digital audio.

•Check that Linear PCM Out (page 32) is set to Down Sample Off.

• Some discs are digital copy protected and do not output high sampling rate digital audio. In this case

the output is automatically downsampled.

DTS audio signals are not output

from the DIGITAL AUDIO OUT

(COAXIAL/OPTICAL).

• If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set

DTS Out (page 32) to DTS > PCM. If you do not do this, noise will be output when you play a DTS disc.

• If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the

amplifier settings, and that the cable is properly connected.

Audio mix does not sound right or

sounds incomplete (for example,

inaudible dialog).

• Make sure that Audio Output Mode (page 36) is set to 2Channel if you’ve connected to the stereo

inputs on your amplifier or TV.

The audio recorded on a Super VCD

disc is not output properly.

• If the audio is switched to “2” when playing a Super VCD that contains only one stereo soundtrack,

there may be no sound at all. Press AUDIO to change the soundtrack.

Can’t hear effect of Virtual

Surround.

• Virtual Surround does not work with SACD or DVD-Audio.

• The Virtual Surround effect is only output through the AUDIO OUT (2ch) analog audio outputs.

• Make sure that Audio Output Mode (page 36) is set to 5.1 Channel.

• The effectiveness of Virtual Surround varies with the disc.

The power automatically turns on. •

This unit’s power may be turned on when you control this unit from a connected TV. I

f you do not want

this unit to be turned on in this way, set this unit’s HDMI Control (page 34) to Off.

The power automatically turns off. • This unit’s power may be turned off when you control this unit from a connected TV. If you do not want

this unit to be turned off in this way, set this unit’s HDMI Control (page 34) to Off.

Your TV and AV system

automatically change inputs.

• The connected TV and AV system automatically may change inputs in response to this unit starting

playback or having the GUI screen (ex. Disc Navigator) displayed. If you do not want your TV and AV

system to change inputs in this way, set this unit HDMI Control (page 34) to Off.

Problem Remedy

DVLX50_WY_EN.book 43 ページ２００７年８月３０日　木曜日　午前１１時１９分

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 93 94

Comments to this Manuals

No comments

Pioneer DV-LX50 User Manual Page 43

Comments to this Manuals

Related products and manuals for DVD players Pioneer DV-LX50