Pioneer DCS-580 User Manual download pdf (Page 14)

Getting started02

14

En

Listening to the radio

The tuner can receive both FM and AM

broadcasts, and lets you memorize your

favorite stations so you don’t have to manually

tune in every time you want to listen. See also

More tuner features: RDS on page 28.

1Press

TUNER

to switch to the tuner, then

press repeatedly to select the AM or FM band.

The display shows the band and frequency.

2 Tune to a frequency.

There are three tuning modes — manual, auto,

and high-speed:

• Manual tuning: Press TUNE +/–

repeatedly to change the displayed

frequency.

• Auto tuning: Press and hold TUNE +/–

until the frequency display starts to move,

then release. The tuner will stop on the next

station it finds. Repeat to keep searching.

• High-speed tuning: Press and hold

TUNE +/– until the frequency display starts

to move rapidly. Keep the button held down

until you reach the frequency you want. If

necessary, fine tune the frequency using

the manual tuning method.

Improving poor FM reception

If you’re listening to an FM station in stereo but

the reception is weak, you can improve the

sound quality by switching to mono.

1 Tune to an FM radio station then press

SHIFT+SETUP

.

2Use

/

to choose FM MODE then press

ENTER

.

3Use

/

to select

FM MONO

then press

ENTER

.

The mono indicator ( ) lights when the tuner

is in mono reception mode.

Select FM AUTO above to switch back to auto-

stereo mode (the stereo indicator ( ) lights

when receiving a stereo broadcast).

Memorizing stations

You can save up to 30 station presets so that

you always have easy access to your favorite

stations without having to tune in manually

each time.

1 Tune to an AM or FM radio station.

Select mono or auto-stereo reception (FM) as

necessary. These settings are saved along with

the preset.

2 Press

SHIFT+SETUP

and use

/

to

choose ‘ST.MEM.’ then press

ENTER

.

3Use

/

to select the station preset you

want then press

ENTER

.

Listening to station presets

1 Make sure the

TUNER

function is

selected.

2Use the

ST +/–

buttons to select a station

preset.

• You can also use the number buttons to do

this.

Listening to other sources

You can connect auxiliary sources (TV, satellite

receiver, etc.) to this unit for playback through

the speaker system. See Connecting auxiliary

components on page 34 for more on this.

• To connect a USB device to the USB

terminal, see USB playback on page 25.

1 Make sure that the external source (TV,

satellite receiver, etc.) is switched on.

2 Press

LINE

to select the source.

Each press switches between LINE

1

, LINE

2

and LINE

3

.

3 If necessary, start playback of the source.

DCS-575_580DVD_EN.book 14 ページ２００８年２月２９日　金曜日　午後５時４３分

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 105 106

Comments to this Manuals

No comments