Pioneer HTP-710 User Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 272
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
The System Setup menu08
74
En
1 Select ‘Channel Level’ from the Manual SP
Setup menu.
2 Select a setup option.
Manual – Move the test tone manually
from speaker to speaker and adjust
individual channel levels.
Auto – Adjust channel levels as the test
tone moves from speaker to speaker
automatically.
3 Confirm your selected setup option.
The test tones will start after you press ENTER.
After the volume increases to the reference
level, test tones will be output.
4 Adjust the level of each channel using
/
.
If you selected Manual, use / to switch
speakers. The Auto setup will output test tones
in the order shown on-screen:
Adjust the level of each speaker as the test tone
is emitted.
1
5 When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Tip
You can change the channel levels at any
time by press , then press CH
SELECT and +/– on the remote control. You
can also press CH SELECT and use / to
select the channel, and then use / to
adjust the channel levels.
Speaker Distance
For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The system can then add the proper delay
needed for effective surround sound.
1 Select ‘Speaker Distance’ from the
Manual SP Setup menu.
2 Adjust the distance of each speaker using
/
.
You can adjust the distance of each speaker in
0.1 m increments.
3 When you’re finished, press RETURN.
You return to the Manual SP Setup menu.
Note
1 If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual
soundtrack.
2.Manual SP Setup
Return
a.Speaker Setting
b.Channel Level
c.Speaker Distance
2b.Channel Level
Test Tone Manual
ENTER:NextReturn
2b.Channel Level
Test Tone [ Manual ]
Please Wait . . .20
Caution
Loud test tones
will be output.
 Return
2b.Channel Level
Front L
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer
Return
[ 0dB]
[ 0dB]
[ 0dB]
[ ––– ]
[ ––– ]
[ 0dB]
[ 0dB]
0dB
2.Manual SP Setup
Return
a.Speaker Setting
b.Channel Level
c.Speaker Distance
2c.Speaker Distance
Front L
Center
Front R
Surround R
Surr. Back R
Surr. Back L
Surround L
Subwoofer
Return
3.0 m
[ 3.0 m ]
[ 3.0 m ]
[ 3.0 m ]
[ –––– ]
[ –––– ]
[ 3.0 m ]
[ 3.0 m ]
HTP-710_VYXCN_En.book 74 ページ 2010年8月23日 月曜日 午後6時47分
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 271 272

Comments to this Manuals

No comments