Pioneer PD-10-K User Manual download pdf (Page 11)

100

Using advanced functions 05

English

DeutschFrançais

Nederlands

Italiano Español Русский

S.RETRIEVER

PURE AUDIO

SACD/CD

DIMMER

SET UP

ENTER

Chapter 5:

Using advanced functions

The functions that can be used differ according to the

type of disc and file. In some cases, some of the

functions cannot be used. See Playback functions on the

right column.

Playing with high-fidelity sound

Sound Retriever

When compressed sound signals are decompressed for

playback, some parts experience dropouts. By setting

the sound retriever function to ON, compensation is

added for those losses, thus producing richer, more

sumptuous sound.

• Press the S.RETRIEVER button.

Each time the button is pressed, the function

will change as follows: S.RTRV: OFF  S.RTRV: LOW 

S.RTRV: HI  Returns to original status

• The sound retriever function is disabled when the

pure audio function is ON.

Pure Audio

This function disables digital audio output and plays

analog audio with high fidelity. When set to ON, the

display shows no indicators. The factory default

condition is OFF.

• Press the PURE AUDIO button.

Press again to turn the function OFF.

• When this function is set to ON and the main unit’s

input is switched to SACD/CD, the PURE AUDIO

indicator will light on the front panel. During disc

playback, the front panel display turns OFF.

• When the PURE AUDIO indicator is lighted, any

iPod/iPhone/iPad connected to the main unit will

not be recharged.

Changing the playback area (layer) of

an SACD/CD

Hybrid SACD discs are composed of two layers, an

SACD layer, and CD layer, allowing you to select which

layer you wish to play.

1 Press the

SACD/CD

button.

Input changes to SACD/CD.

2 In the stop mode, press the SACD/CD

button.

Each time the button is pressed, the playback alternates

between the CD area and SACD 2 channel area.

Note

• This unit does not support SACD multi-channel

areas.

Adjusting overall display illumination

This unit is equipped with a dimmer function to allow the

display illumination to be adjusted in three levels,

responding to differing levels of ambient lighting. The

factory default is the brightest setting.

• Press the

DIMMER

button.

Each time the button is pressed it the brightness

cycles through the three levels.

• The dimmer setting cannot be changed when a

disc is playing with the pure audio function ON (see

at left).

• The brightness of the STANDBY indicator does not

change.

Auto power down (automatically sets

power to standby)

This function automatically switches the unit to standby

mode if no signal or switch operation is detected for 30

minutes.

1 Press the

SET UP

button.

2 Change the setting and confirm.

Use the / button to set the function ON

or OFF as desired, then press the ENTER

button to confirm.

Note

• This function is disabled when iPod input is

selected.

Playback functions

The functions that can be used differ according to the type of disc and file. In some cases, some of the functions

cannot be used. Check the usable functions on the table below.

Function

1 Some functions may not work for some discs or files, even if indicated [] on the table.

Disc/file type

SACD CD-DA

CD-R/-RW

2 Also see Playback of CD-R/CD-RW discs on page 12.

WMA

MP3

AAC

3 • AAC files can be played back only on the PD-30.

• Also see Playable file formats on page 12.

DSD

4 Also see Playing DSD discs on page 12.

Fast forward/Fast reverse



Skip function



Direct search

(designate a specific track for playback)

 ––

Repeat playback



Random playback



Programmed playback

(Play tracks in a predetermined order)

 ––

View disc data



Sound Retriever

–– –

Pure Audio





5 This function is enabled only during playback of files recorded on disc.



SACD/CD



6 Hybrid SACD discs only.

–––

PD-30_PWSYXZT8.book 11 ページ２０１２年５月７日　月曜日　午前１１時３３分

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 99 100

Comments to this Manuals

No comments

Pioneer PD-10-K User Manual Page 11

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer PD-10-K