Pioneer SC-2022-K User Manual download pdf (Page 41)

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.

INPUT

SELECT

iPod

USB CBL

SATTUNER

ADPT

CDTV

RECEIVER

BDR

BD DVDDVR

NET

HDMI

VOLUME

RECEIVER

AUTO/ALC/

DIRECT

RECEIVER

1 Switch on your system components and receiver.

Start by switching on the playback component (for example a DVD player), your TV and subwoofer (if you have

one), then the receiver (press u RECEIVER).

Make sure that the TV’s video input is set to this receiver.

2 Select the input function you want to play.

You can use the input function buttons on the remote control, INPUT SELECT, or the front panel

INPUT SELECTOR dial.

! If you need to manually switch the input signal type press SIGNAL SEL (page 50).

3 Press to the receiver operation mode.

4 Press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) to select ‘AUTO SURROUND’

and start playback of the source.

If you’re playing a Dolby Digital or DTS surround sound source, you should hear surround sound. If you are play-

ing a stereo source, you will only hear sound from the front left/right speakers in the default listening mode.

! You may need to check the digital audio output settings on your DVD player or digital satellite receiver. It

should be set to output Dolby Digital, DTS and 88.2 kHz / 96 kHz PCM (2 channel) audio, and if there is an

MPEG audio option, set this to convert the MPEG audio to PCM.

! See also Listening to your system on page 48 for information on different ways of listening to sources.

It is possible to check on the front panel display whether or not multi-channel playback is being performed prop-

erly. For details, see Auto Surround, ALC and Stream Direct with different input signal formats on page 100.

When using surround speakers, 2DIGITAL is displayed when playing Dolby Digital 5.1 channel signals, and DTS

is displayed when playing DTS 5.1-channel signals.

If the display does not correspond to the input signal and listening mode, check the connections and settings.

5 Use the VOLUME +/– to adjust the volume level.

Turn down the volume of your TV so that all sound is coming from the speakers connected to this receiver.

Note

! The playback operation can be performed on the OSD screen for certain inputs, but the OSD screen is only

displayed when the receiver and TV are connected with an HDMI cable. If the receiver and TV are connected

with anything other than an HDMI cable, perform the various operations while watching the front panel.

Turning off the sound

Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).

% Press MUTE.

Playing a source with HDMI connection

% Use INPUT SELECT to select the input function connected to the receiver’s HDMI input

terminals.

You can also perform the same operation by using the INPUT SELECTOR dial on the front panel or by pressing

HDMI on the remote control repeatedly.

! Set the HDMI parameter in Setting the Audio options on page 61 to THROUGH if you want to hear HDMI audio

output from your TV (no sound will be heard from this receiver).

! If the video signal does not appear on your TV, try adjusting the resolution settings on your component or dis-

play. Note that some components (such as video game units) have resolutions that may not be converted. In

this case, use an analog video connection.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 112 113

Comments to this Manuals

No comments

Pioneer SC-2022-K User Manual Page 41

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer SC-2022-K