Pioneer SC-LX85 User Manual download pdf (Page 91)

The System Setup and Other Setup menus

! We recommend setting the port number to 23

or within the range of 49152 to 65535.

! When the port number is changed, network

communications between the receiver and

AVNavigator are no longer possible. In this

case, click Settings on the AVNavigator’s

function menu, select the IP Address tab

and input one of the port numbers set on the

receiver side to enable communications with

AVNavigator.

Wireless LAN Converter

This setting is required for connecting a wire-

less LAN converter to the receiver and using

wireless network functions.

For the wireless LAN converter, use the

AS-WL300.

Access Point Setting

Make the connection settings for the wireless

LAN converter connected to the receiver and

the access point. Connect the wireless LAN

converter to the receiver and set DHCP on the

“IP Address, Proxy” settings menu beforehand

(page 89). There are four way to make the set-

tings for connecting to the access point, as

shown below.

! WPS (PBC) – Connection settings are made

automatically simply by pressing the WPS

buttons on the access point and wireless LAN

converter, following the instructions displayed

on the receiver’s screen. This is the simplest

way of making the settings, and is possible

when the access point and wireless LAN

converter are equipped with WPS buttons.

Network connection settings require

approximately 2 minutes from the time the

WPS buttons are pressed. Wait until the

settings are completed.

! WPS (PIN) – Display a list of the SSIDs of

connectable access points and select the

access point to which you want to connect

from this list. Connection settings are made by

inputting the 8-digit PIN code displayed on the

receiver’s screen to the access point to which

you want to connect.

! Search for Access Point – Display a list of

the SSIDs of connectable access points and

select the access point to which you want to

connect from this list. Connection settings

with the access point are made by setting the

access point’s security protocol, security key

and WEP default key (only when the access

point’s security protocol is WEP).

! Manual Setting – Connection settings are

made by manually inputting the SSID, security

protocol, security key and WEP default key

of the access point to which you want to

connect.

Note

! When setting the wireless LAN converter, set

Network Standby to OFF, turn the receiver’s

power off, then turn the power back on and

set the wireless LAN converter. Check the

network connections on the wireless LAN

converter, then set Network Standby to ON

as necessary.

! If there is a “; ” (semicolon) in the access

point’s SSID or security key, wireless LAN

connection will not be possible even after

the wireless LAN converter settings are

completed. Change the setting of the access

point’s SSID or security key to a character

string that does not include a “; ” (semicolon).

! If it is not possible to connect to the access

point with the WPS (PBC) or WPS (PIN)

connection settings, we recommend

making the connection settings at

Search for Access Point or Manual Setting.

WLAN IP Address

If the IP address of a device connected in the

LAN other than the wireless LAN converter

is set to “192.168.XXX.249”, the IP address of

the wireless LAN converter will be redundant,

making connection to the access point impos-

sible. In this case, use this setting to set an IP

address specific to the wireless LAN converter.

1 Select ‘Wireless LAN Converter’ from

the Network Setup menu.

2 Make the wireless LAN converter

settings as necessary.

When making the connection settings of the

wireless LAN converter and access point, select

“Access Point Setting” and make the connec-

tion settings for the wireless LAN converter and

access point following the instructions on the

screen.

If you want to set the wireless LAN converter’s

IP address, select “WLAN IP Address” and

input the IP address.

Checking the Network

Information

The setting status of the following network-

related items can be checked.

! IP Address – Check the IP address of this

receiver.

! MAC Address – Check the MAC address of

this receiver.

! Friendly Name – Friendly Name on page 90.

! SSID – Check the SSID of the access point

connected with the wireless LAN converter

(only when a wireless LAN converter is

connected).

1 Set the remote control to the receiver

operation mode, then press HOME MENU.

A Graphical User Interface (GUI) screen

appears on your TV. Use i/j/k/l and

ENTER to navigate through the screens and

select menu items. Press RETURN to exit the

current menu.

2 Select ‘Network Information’ from the

Home Menu.

Display the setting status of the network-related

items.

The Other Setup menu

The Other Setup menu is where you can make

customized settings to reflect how you are

using the receiver.

1 Set the remote control to the receiver

operation mode, then press HOME MENU.

A Graphical User Interface (GUI) screen

appears on your TV. Use i/j/k/l and

ENTER to navigate through the screens and

select menu items. Press RETURN to exit the

current menu.

2 Select ‘System Setup’ from the

Home Menu.

3 Select ‘Other Setup’, then press ENTER.

4 Select the setting you want to adjust.

If you are doing this for the first time, you may

want to adjust these settings in order:

! Auto Power Down – Sets the power to turn

off automatically when the receiver is not

being used.

! Volume Setup – Sets up the volume-related

operations of this receiver (page 92).

! Remote Control Mode Setup – Sets this

receiver’s remote control mode (page 92).

! Flicker Reduction Setup – Adjusts the way

the GUI screen looks (page 92).

! Software Update – Use to update the

receiver’s software and check the version.

! SC-LX85 only:

RF Remote Setup – Allows the CU-RF100

to be used even when the receiver is in the

standby mode (page 92).

! SC-LX75 only:

EXTENSION Setup – Allows the CU-RF100

to be used even when the receiver is in the

standby mode (page 92).

! SC-LX85 only:

Multi Ch In Setup – Specifies the optional

settings for a multi-channel input (page 92).

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 121 122

Comments to this Manuals

No comments

Pioneer SC-LX85 User Manual Page 91

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer SC-LX85