Pioneer PDP-S58 Operations Instructions download pdf (Page 4)

English

2. Screw an supplied screw into the

speaker mounting hole (lower of the

two) at the top, rear of the display.

Do not tighten it all the way yet. Leave it loose, with

about 5 mm left to tighten.

3. Hang the speaker mounting fitting

on the screw you installed at the top

by passing the wide part over it and

lowering into the slot; screw in the

lower screw temporarily.

After passing the wide part of the hole of the speaker

mounting fitting (top) over the screw, lower the

speaker onto it.

After passing the

wide part of the hole

over the screw, lower

the speaker.

4. Adjust the position of the speaker

and then tighten the upper and

lower screws firmly.

5. Tighten the two screws, at the top

and bottom for each speaker (total of

four screws), thus fixing the

speakers to the display.

6. Pass the supplied speaker cable

between the speaker and the plasma

television (below the speaker

mounting fitting) from below.

7. Connect the speaker cables to the

speaker (see next page).

8. Insert the cable in the groove on the

speaker.

9. Connect the other end of the speaker

cables to the rear of plasma

television (see next page).

Speaker Cable

Speaker Terminal

Insertion in

groove

Speaker

Mounting

Hole

Top, rear of

Display

Top of Display

5 mm

Leave a space of about 5 mm

Tighten with the

provided screw the

bottom speaker

mounting fitting to the

display temporarily

(one place bottom).

1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments

Pioneer PDP-S58 Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Loudspeakers Pioneer PDP-S58