Pioneer S-LX70W User Manual download pdf (Page 7)

English Français Deutsch

Nederlands

Italiano Español

8 Auto Standby switch (AUTO STANDBY)

Switches the Auto Standby feature on/off.

When switched

(the default setting is

OFF

), the

Auto Standby feature becomes active. In this mode, if

there is no input signal for 12 minutes the system

automatically switches to standby. The power is

automatically switched on again if an input signal is

detected.

NOTE:

• There may be cases where a connected component

outputs noise or some other non-audio signal which

causes this system to automatically power on when in

Auto Standby mode. If this happens, switch off the

Auto Standby mode and switch the system on/off

manually.

9 Line Level Output terminal (LINE LEVEL OUTPUT)

Used for connecting other equipment through the

amplifier. The signal output from this jack is not

affected in any way by the settings of the various

controls on the unit.

10 Line Level Input terminal (LINE LEVEL INPUT)

Connect to the SUBWOOFER PREOUT terminal of an

amplifier or receiver, with the specially provided RCA

plug cord.

11 AC INLET

• Connect the power cord to the powered subwoofer

unit’s AC INLET.

• Connect the power cord to a AC socket.

CONNECTIONS

Before making or changing any connections, switch off the power and disconnect both this unit and the

amplifier/receiver from the AC outlet.

LINE LEVEL CONNECTION

This connection is for an amplifier or receiver equipped

with a

SUBWOOFER PREOUT

terminal. Connect to the

LINE LEVEL INPUT

terminal on this unit, using the

specially provided RCA plug cord.

NOTE:

• When connected to the

PREOUT

terminal for

surround center channel on the amplifier or receiver,

the bass is heard only on the center channel, so it will

be insufficient.

OPERATION

For details regarding operating part functions, refer to

page 6.

1. Turn the POWER switch (2) ON.

• If the unit’s power cord is connected to a switched AC

outlet on the amplifier or receiver and the switch is left

ON, the unit can be turned ON/OFF together with the

amplifier or receiver.

• If the unit cannot be connected to the amplifier or

receiver, turn the power to the amplifier or receiver ON

before turning the power to the unit ON. When turning

the power OFF, turn the power to the unit OFF before

turning the power to the amplifier or receiver OFF.

2. Operate the amplifier or receiver and adjust the

volume of the other speakers.

3. Adjust the volume of the bass with the VOLUME

knob (3).

• When necessary, operate the

CROSSOVER

knob (

)

and

PHASE

switch (

), and then adjust with the

VOLUME

knob (

). Set the

BASS MODE

switch (

) to

either

MUSIC

CINEMA

4. Turn the POWER switch (2) OFF.

• The power indicator disappears.

S-LX70W/S-81W-MK

Music mode Frequency response

Frequency (Hz)

100

1000

10000

Sound pressure level (dB)

Non-bypass

(Crossover 200 Hz)

Bypass

S-LX70W/S-81W-MK

(Rear Panel)

Supplied RCA plug cord

01_S_LX70W_En.book 7 ページ２００８年７月１８日　金曜日　午後５時４分

1 2 3 4 5 6 7 8 9 10 11 12 ... 98 99

Comments to this Manuals

No comments

Pioneer S-LX70W User Manual Page 7

Comments to this Manuals

Related products and manuals for Microphones Pioneer S-LX70W