Pioneer DMP-555 User Manual download pdf (Page 16)

ADVANCED OPERATIONS

EXIT/RELOOP

ONE TRACK

LOOP SET

SCRATCH

PLAY/PAUSE

LOOP IN/

REAL TIME CUE

LOOP OUT/

OUT ADJ.

CARD CONTROL

LOOP

START/STOP

1, ¡

3/ 7

SOURCE SELECT CD

SOURCE SELECT CARD

Jog dial

Scratch Play (*)

With the SCRATCH button set to ON (SCRATCH button indicator lights), rotate

the Jog dial; scratch play is performed in accordance with the direction and speed

of dial rotation.

1. Press the SCRATCH button so that the SCRATCH button

indicator is lighted.

÷ When the SCRATCH button is pressed the SCRATCH button indicator

flashes as data is stored in memory. When data storing is completed, the

flashing indicator lights steadily. If the Jog dial is moved erratically for

scratch play while the indicator is flashing, sound may be distorted.

2. Rotate the Jog dial in the direction and at the speed

desired.

÷ CD playback will occur in response to the direction and speed of Jog dial

rotation.

3. When Jog dial rotation is stopped:

÷ CD playback returns to its original condition.

Loop Play (*)

7 To create a loop:

Independent loops can be created for CD and memory cards.

1. Press the PLAY/PAUSE (6) button to begin playback.

2. During either playback or audible pause mode, press the

LOOP IN/REAL TIME CUE button at the desired loop-in

point.

÷ This step is not necessary if you wish to use a pre-selected cue point as the

beginning point for the loop.

3. As playback continues, press the LOOP OUT/OUT ADJ.

button at the desired loop-out point.

÷ Loop play will begin between the loop-in and loop-out points.

7 To exit from a loop (cancel loop)

During loop play, press the EXIT/RELOOP button.

÷ When the play reaches the end of the loop, the loop-out point will be ig-

nored and normal playback will continue uninterrupted.

7 To change the loop-out point

1. During loop play, press the LOOP OUT/OUT ADJ. button.

÷ The display will show the out point time, the LOOP OUT/OUT ADJ. but-

ton indicator will flash rapidly, and the LOOP IN/REAL TIME CUE but-

ton indicator will go out.

2. Press the SEARCH button (1, ¡), or rotate the Jog

dial.

÷ The loop-out point will move in 1-frame increments.

÷ The loop-out point cannot be moved to any position before the loop-in

point.

÷ To cancel the loop-out adjust mode, either press the LOOP OUT/OUT

ADJ. button, or wait thirty seconds and the function will automatically

return to loop play.

7 To return to a loop (RE-LOOP)

During playback, press the EXIT/RELOOP button.

÷ Playback will return to the previously set loop-in point, and loop play will

recommence.

7 To play a single track as a loop (one-track loop)

During playback or audible pause mode, press the ONE

TRACK LOOP SET button.

÷ A loop will be automatically created using the start of the currently playing

track as the loop-in point, and the track end as the loop-out point; loop

play will begin automatically.

÷ Note that if the start and end of the track includes silent (non-recorded)

intervals, the loop will include those silent intervals.

÷ The loop-out point can be modified by following the procedures in the sec-

tion “To change the loop-out point.”

7 To set a loop on the memory card during dual mode

playback (For details, ☞ P. 18)

Ordinarily, when memory card playback is mixed with CD playback, the memory

card is set for one-track loop. It is possible, however, to set a specific loop range

if desired.

1. Press the SOURCE SELECT CARD button ([CARD] button

indicator lights), then play the track you wish to use for

looping.

2. Set the loop-in and loop-out points.

3. Press the CUE button in the MIXOUT CARD CONTROL block.

÷ This completes setting of the loop on the memory card.

÷ To start playback of the selected loop on the memory card, press the

SOURCE SELECT CD button ([CD] button indicator lights), then press

the LOOP START / STOP button (3/7) in the MIXOUT CARD CON-

TROL block.

÷ When the playback track on the memory card is changed, the previously

set loop range is canceled.

Functions indicated by * cannot be used when the Digital mode switch

(DIGITAL OUT) is set to ON (and the digital output terminal is used).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Pioneer DMP-555 User Manual Page 16

Comments to this Manuals

Related products and manuals for Musical Instruments Pioneer DMP-555