Pioneer dvd-114 User Manual download pdf (Page 10)

DVD-114 Operating Instructions

- 7 -

7) Audio Output

connector for analog audio output, uses a Modex 70553 connector

Select the appropriate cable from the following chart:

Pin Name Function

1 L Left channel audio output

2 G Ground

3 G Ground

4 R Right channel audio output

8) Device Configuration Jumper

set this jumper switch to select the drive use mode supporting the computer

(

jumpered

= ON;

no jumper

= OFF)

Pin Name Function

1MA*

on Drive set to Master mode

2 SL on Drive set to Slave mode

3 CS on Drive set to Cable Select mode

4 Reserved

5 Reserved

9) Host IDE Interface

40-pin I/O connector in accordance with ATA specifications

10) DC Input

power supply input for DC +5 V and +12 V

Pin Name Function

1 +12 Power supply input for DC +12 V

2 G Ground

3 G Ground

4 +5 Power supply input for DC +5 V

4.3 Region Code Information

The maximum number of times the Region Code may be changed is five (

including the initial setting. The fifth change becomes PERMANENT.

Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD

discs are optional. DVD discs with no specified Region Code may be played on any

player.

1 2 ... 5 6 7 8 9 10 11 12 13

No comments

Pioneer dvd-114 User Manual Page 10