Pioneer PRV LX1 User Manual download pdf (Page 2)

PRV-LX1

SYSTEM UPDATING GUIDE

Thank you for purchasing our PRV-LX1 DVD recorder.

We herein send you the PRV-LX1 System Updating Guide together with the actual

updating program.

Please update the system of your PRV-LX1 by following the procedure described in this

document.

For inquiries on the system updating, please contact out Technical Support Center.

You started the update mode without

loading the disc.

The update mode failed to start up and the

unit entered the ordinary power ON mode.

You turned off the unit accidentally in the

middle of updating.

Turn the unit OFF then ON again.

You might released the ENTER button too

early. Press the STANDBY/ON button to put

the unit in the standby mode, and then

restart the installation by following the

updating procedure.

Restart the installation by following the

updating procedure. If the unit will not

start up normally, please contact our

Technical Support Center.

PRV-LX1

SYSTEM UPDATING GUIDE

IN CASE OF TROUBLE

Technical Support Center (800) 421 - 1613

(E-mail: [email protected])

Applicable Systems



■ PRV-LX1 with system versions "1.05/1.02" or "1.11/1.02"

* The system version of your PRV-LX1 can be confirmed by opening the [Function Menu] and selecting [System] then

[Information].



Details of Updating



■ Improvement of recording reliability

This will solve the problems related to encoding error (which causes recording to stop) that may occur

rather rarely during recording.



■

Modification of the routine for processing recording stoppage due to recording error



This consists of addition of the function for saving the clip being recorded as a project in HDD in case

recording is stopped in the middle due to an error.

* An error occurring during recording causes a part of the clip being recorded (last part) to be lost, but of the clip are

left in the HDD. The amount of lost data is variable depending on the vide encoding rate, and may be up to 40 sec.

at the highest rate and up to 2 min. 50 sec. at the lowest rate. If DVD1/2 is selected as the recording destination,

the disc write is aborted and the disc will be ejected.

The ejected disc is not reusable, but the part of clip other than the part lost due to the error is saved in the HDD as

a project having the same name.

The saved project is inserted at the top of the project list (location below the New project) in the project menu

available under the [Function Menu].

* Should an error occurs during recording, press the OK button in the diagram box displayed on the screen, turn the

unit off and restart it again before retrying recording.



■ Lift of restrictions on the resolution of imported image files

The image size of imported files is no longer restricted because the method of conversion and

compression of the imported menu background images (JPEG or BMP files) into video files is changed.

* Conversion at best quality is possible when the import file is created in the 720 x 480 resolution.

Executing the updating causes the DVD background images files imported by the user to

be deleted.

These files need to be imported again after completion of updating.

Checking the System Version

STEP4

FUNCTION button

Function Menu Display

System Version Check Display

Checking the System Version

IN CASE OF TROUBLE

① Press the STANDBY/ON button to start up

the unit.

② Press the FUNCTION button on the front

panel to display the [Function Menu].

Select [SYSTEM] in SET UP.

③ Select [Information] and make sure that

[System Version] is "1.12/1.02."

Now updating is complete.

1 2

Comments to this Manuals

No comments

Pioneer PRV LX1 User Manual Page 2

Comments to this Manuals

Related products and manuals for Players Pioneer PRV LX1