Pioneer X-EM16 User Manual download pdf (Page 13)

English

Français Español

Additional information

∫ USB playability information

Compatible USB devices:

• USB flash memory (USB1.1/2.0 (Full Speed))

• USB flash players (USB1.1/2.0 (Full Speed))

Supported formats:

• USB or memory file format: FAT16, FAT32

• MP3 bitrates (data rates): 32 kbps to 320 kbps and

variable bitrates

• Folder Depth 8: including ROOT

• Maximum number of folders: 256 (including ROOT)

• Maximum number of tracks/files: 999

Maximum number of files that this unit can recognize in

a folder : 999

• ID3tag: v1.0, v1.1, v1.2, v2.0, v2.2, v2.3, v2.4

Audio files cannot be played depending on the encoding

software settings, USB device type, recording, other

conditions.

Unsupported formats:

• Empty albums: an album that does not contain MP3

files

• Unsupported file formats are skipped. For example,

Word documents (.doc) or MP3 files with extension.dlf

are ignored and not played.

• Audio files except for MP3.

• Other file systems (exFAT, NTFS, HFS etc.) other than

FAT16 and FAT32.

∫ Supported MP3 disc formats

• ISO9660 Level 1/Level 2, Joliet

• Maximum number of folders: 256 (including ROOT)

• Maximum number of tracks/files: 999

Maximum number of files that this unit can recognize in

a folder : 999

• Supported sampling frequencies: 32 kHz, 44.1 kHz,

48 kHz

• Supported bitrates: 32 kbps to 320 kbps, variable

bitrates

• Folder Depth 8: including ROOT

Audio files cannot be played depending on the encoding

software settings, USB device type, recording, other

conditions.

Troubleshooting

WARNING

• Never remove the casing of this apparatus.

• Incorrect operation is often mistaken for trouble or

malfunction. If you think that there is something wrong with

this component, check the points below. Sometimes the

trouble may lie in another component. Inspect the other

components and electrical appliances being used. If the

trouble cannot be rectified even after checking the points

below, ask your nearest Pioneer authorized service center

or your dealer to carry out repair work.

• If the unit does not operate normally due to external

effects such as static electricity, disconnect the power plug

from the outlet and insert it again to return to normal

operating conditions.



If “PROTECT” appears on the display.

 Immediately unplug the power cord, and check the

following items after

“PROTECT”

disappears.

• Make sure that nothing is blocking the ventilation holes of

the system.

After you have checked these above items and found no

problems, reconnect the power cord, and turn on the

system. If the issue persists, contact your nearest dealer.



No power.

 Make sure that the AC power cord is connected

properly.

 Make sure that there is power at the AC outlet.

 In automatic standby mode, the system switches off

automatically 15 minutes after the system stays

inactive.



No sound or poor sound.

 Adjust the volume.

 Make sure that the speakers are connected correctly.



No response from the system.

 Reconnect the AC power plug, and then turn on the

system again.

 With a power-saving feature, the system switches off

automatically 15 minutes after the system stays

inactive.



Remote control does not work.

 Reduce the distance between the remote control and

the main unit.

 Insert battery with its polarity (+/– signs) aligned as

indicated.

 Replace the batteries.

 Aim the remote control directly at the sensor on the

front panel of the main unit.



No disc is detected.

 Insert a disc.

 Make sure that you place the disc with its label facing

upwards.

 Wait until the moisture condensation at the lens has

cleared.

 Replace or clean the disc.

 Make sure that the recordable disc is finalized and the

format is supported.



USB storage device is not supported.

 Make sure that the USB storage device is compatible

with the system.

 Is the USB storage device connected properly? Make

sure that the device is firmly inserted.



The file or folder name (album name) is not displayed

correctly.

 The character code that can be displayed by this unit

are as follows:

• Upper cases (A to Z).

• Numbers (0 to 9).

• Symbols (< >* +, [ ] _).

Other characters appear as “_”.



“OVER CURRENT” appears.

 A problem has been detected with the level of

electrical current from the (USB) port. Turn off

the system and remove the USB device from the

(USB) port. Make sure there is no problem with

the USB device. If this display pattern persists,

contact your nearest dealer.



Cannot play some files on the USB storage device.

 Make sure that the file format is supported.

 Make sure that the file quantity does not exceed the

maximum. (page 13)



Radio reception is poor.

 Increase the distance between the system and other

electrical appliances.

 Fully extend the antenna.



Timer does not work.

 Set the clock correctly.

 Switch on the timer.

X-EM16_26_TOC&Body.fm 13 ページ２０１６年８月８日　月曜日　午後１２時２３分

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 103 104

Comments to this Manuals

No comments

Pioneer X-EM16 User Manual Page 13

Comments to this Manuals