Pioneer PLASMA DISPLAY User Manual download pdf (Page 11)

English

Part Names and Function

A AC IN

Connect the included power cord here.

B EXT SPEAKER L and R

Connect speakers (optional) here. Maintain the correct

polarity. Connect the

(positive) speaker wire to the

EXT SPEAKER terminal and the (negative)

speaker wire to the

EXT SPEAKER terminal on

both LEFT and RIGHT channels.

Please refer to your speaker’s owner’s manual.

C VIDEO1, 2, 3 (BNC, RCA, S-Video)

Connect VCR’s, DVD’s or Video Cameras, etc. here.

VIDEO1 can be used for Input or Output (see page

24).

D AUDIO1, AUDIO2, AUDIO3

These are audio input terminals.

The input is selectable. Set which video image to allot

them from the SOUND menu screen.

E COMPONENT1

Connect DVD’s, High Definition or Laser Discs, etc.

here.

F PC2/COMPONENT2

PC2: You can connect an analog RGB signal

and the syncronization signal.

COMPONENT2

: You can connect DVDs, High

Definition sources, Laser Discs, etc.

here.

This input can be set for use with an

RGB or component source (see page

17).

G PC1 (mini D-Sub 15pin)

Connect an analog RGB signal from a computer, etc.

here. This input can be used for Input or Output (see

page 24).

H PC3 (DVI 24pin)

Connect a digital signal (TMDS) from a source with a

DVI output.

I RS-232C

Never connect any component to this connector

without first consulting your Pioneer installation

technician.

This connector is used for plasma display setup

adjustments.

J REMOTE IN

Connect the remote cable* to the remote control’s

remote jack to obtain wired remote control.

K REMOTE OUT

Connect the remote cable* to the REMOTE IN jack of

the other display monitor to obtain wired remote

control.

Information

• For Y/CB/Cr, connect to the COMPONENT1 or PC2/

COMPONENT2 terminals.

• For SCART, this unit provides three ways to connect:

· SCART1: Connect R/G/B and composite sync. to

the PC2/COMPONENT2 terminals. (R, G, B and

HD connector)

· SCART2: Connect R/G/B to the COMPONENT2

terminals and composite sync. to the VIDEO1

terminal.

· SCART3: Connect R/G/B and composite sync. to

the PC1 terminal.

* The 1/8 Stereo Mini cable must be purchased separately.

Rear View/ Terminal Board

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 265 266

Comments to this Manuals

No comments

Pioneer PLASMA DISPLAY User Manual Page 11

Comments to this Manuals