Pioneer SEP-C1 User Manual download pdf (Page 27)

TROUBLESHOOTING

English

TROUBLESHOOTING

If you believe the unit is failing to work properly, check the following troubleshooting table for tips. Sometimes simple mistakes in setup

or operation may appear like serious problems. There are also times when the problem in question may be caused by something else other

than the unit, and at times like these you should check any other electronic devices being used at the same time.

If the problem in question continues to persist even after checking the troubleshooting table below and taking whatever corrective action

is recommended, contact your nearest Pioneer Service Station or contact the store from which you purchased the unit for further

assistance.

ABOUT THE LCD SCREEN

• Some LCD monitors may display so-called “hot pixels” or “dead pixels” (constantly bright pixels or pixels that are permanently

off). This is a phenomenon characteristic of LCD displays and is not considered a malfunction.

• When used in cold regions, the screen may appear dark for a while after the power is first turned on. As the unit warms up with

time, the screen will return to normal brightness.

• Avoid viewing the LCD screen in direct sunlight, since the light reflected off the screen may make the image difficult to view.

ABOUT OEL (ORGANIC EL) SCREENS

• The two screens (displays A/B) may display slightly different color characteristics, but this is not a malfunction.

SEP-C1 UPDATES

Software for this unit may be updated to improve operation or functionality. For details consult the following support website:

http://www.prodjnet.com/support/

Description of problem Possible cause of problem Recommended action

Unit is not recognized even

when connected to computer.

• Driver software is not installed properly.

If the unit is not connected properly to the

computer the version display utility cannot be

used to display the firmware version. To confirm

the firmware version, see the section “ABOUT

THE DRIVER PROGRAM,  Confirm the driver

version” (P. 19).

• Install the driver software. If it has already been

installed, uninstall it, then install it again.

• The USB auxiliary power cable is not connected. • Connect the USB auxiliary power cable to the

computer first, followed by the USB cable.

During playback, tracks

cannot be loaded.

• LOAD LOCK is set to ON. • Use UTILITY screen to set LOAD LOCK to OFF.

Track information characters

are garbled.

• A non-supported language font has been used. • Use a supported language font to input

information. Supported languages include

western European languages, Russian,

Simplified Mandarin Chinese, and Japanese.

• This unit’s track information function cannot be

displayed by DJ software.

• Consult the operating instructions for your DJ

software program for more information about

languages supported by the program.

Television screen is disrupted,

or noise is heard during FM

broadcasts.

• Adverse influence from the unit. • Either turn the unit’s power OFF, or separate

farther from the television.

SEP-C1_EN.book 27 ページ２００８年３月２４日　月曜日　午前１０時５２分

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 240 241

Comments to this Manuals

No comments

Pioneer SEP-C1 User Manual Page 27

Comments to this Manuals