Pioneer PDP-506FDE User Manual download pdf (Page 42)

Enjoying through External Equipment

Using i/o Link.A

The Plasma Display System incorporates three typical i/o

Link.A functions for smooth connections between Media

Receiver and other audiovisual equipment.

One Touch Play

While the Plasma Display System is in standby mode, it

automatically turns on and plays back images from the

audiovisual source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the

WYSIWYR button, you can automatically start recording by

pressing the WYSIWYR button.

Preset Download

Automatically transfers channel preset information from the

tuner on the Plasma Display System to the one on the

connected audiovisual equipment (e.g. VCR) via the INPUT 2 or

3 terminal.

NOTE

• The i/o Link.A functions work only when the audiovisual

equipment is connected to the INPUT 2 or 3 terminal on the

Media Receiver with i/o Link.A via a fully wired 21-pin SCART.

• Either INPUT 2 or 3 is available for i/o Link.A, depending on

the switch on the rear of the Media Receiver.

• Using this switch, select the input terminal to which

recording equipment such as a VCR has been connected.

• Refer to operation manuals of each external equipment for

the details.

• If a SCART cable has been connected to the INPUT 3

terminal with the i/o Link.A activated, input signals (other

than Component) are automatically identified and displayed.

If the i/o Link.A has been deactivated, Video is always

selected for signals other than RGB because the system

cannot identify among RGB, Y/C (S-Video), and CVBS (Video)

signals; for example, receiving Y/C (S-Video) signals results

in monochrome display.

Watching a DVD image

Connecting a DVD player

Use the INPUT 2 terminal when connecting to a DVD player

and other audiovisual equipment.

Displaying a DVD image

To watch a DVD image, press INPUT 2 on the remote control

unit or press INPUT on the Media Receiver to select INPUT2.

NOTE

• If DVD images do not come in clearly, you may need to

change the input signal type setting using the menu. See

page 36.

• Refer to your DVD player operation manual for the signal

type.

ANT

INPUT 2

INPUT 1

SERVICE ONLY

INPUT

o link. A

SELECT

INPUT 2

INPUT 3

HDMI

COMPONENT VIDEO

B PR

AUDIO

AUDIO OUTPUT

i / o link.A

SELECT

INPUT

Media Receiver (rear view)

SCART cable

(commercially available)

VCR or DVD Recorder

ANT

INPUT 2

INPUT 1

SERVICE ONLY

INPUT

o link.A

SELECT

INPUT 2

INPUT 3

HDMI

SYSTEM CABLE

BLACK WHITE

COMPONENT VIDEO

B PR

AUDIO

AUDIO OUTPUT

ia Receiver

(

rear view

)

SCART cable

(commercially available)

DVD player

When using component cable,

select “COMPONENT” for

“Input Select” in the menu.

See page 36.

At the same time connect a

SCART cable to input audio

signals.

Component cable

(commercially

available)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 140 141

Comments to this Manuals

No comments

Pioneer PDP-506FDE User Manual Page 42

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-506FDE