Pioneer PDP-507XD User Manual download pdf (Page 58)

Enjoying through External Equipment

Using HDMI Input

This Plasma Television is equipped with two HDMI terminals

(INPUT 3 and 4) which accept digital video and audio signals.

To use the HDMI terminal, activate the terminal and specify the

types of video and audio signals to be received from the

connected equipment. For the types of these signals, see the

operation manual that came with the connected equipment.

Before starting the menu, press INPUT 3 or INPUT 4 on the

remote control unit or press INPUT on the Plasma Television to

select INPUT 3 or INPUT 4.

For audio, the system supports the following:

• Linear PCM (STEREO 2ch)

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

NOTE

• PC signals are out of correspondence.

• It may take time until an image is displayed depending on the

equipment connected.

Connecting HDMI equipment

When using the INPUT 3 HDMI terminal:

When using the INPUT 4 HDMI terminal:

To activate the HDMI terminal:

When you use the INPUT 3 HDMI terminal, use the following

procedure to activate the terminal.

1 Press HOME MENU.

2 Select “Option” ( / then ENTER).

3 Select “HDMI Input” ( / then ENTER).

4 Select “Setting” ( / then ENTER).

5 Select “Enable” ( / then ENTER).

6 Press HOME MENU to exit the menu.

NOTE

• You need not activate the INPUT 4 HDMI terminal; you

cannot manually deactivate this terminal.

To specify the type of digital video signals:

1 Repeat steps 1 to 3 provided for “To activate the HDMI

terminal.”

2 Select “Video” ( / then ENTER).

3 Select the type of digital video signals ( / then ENTER).

• If you select “Auto”, an attempt will be made to identify

the type of digital video signals when digital video

signals are received.

4 Press HOME MENU to exit the menu.

Input signal table

1920*1080i@50 Hz

720*576p@50 Hz

1280*720p@50 Hz

720(1440)*576i@50 Hz

1920*[email protected] Hz/60 Hz

720*[email protected] Hz/60 Hz

1280*[email protected] Hz/60 Hz

720(1440)*[email protected] Hz/60 Hz

1920*1080p@24 Hz

Plasma Television (rear view)

HDMI cable having the

HDMI mark

(commercially available.)

SCART cable

(commercially available.)

Connect the SCART cable

only when inputting

analogue audio signals.

HDMI equipment

Item Description

Disable

(factory default)

Deactivates the HDMI terminal.

Enable Activates the HDMI terminal.

Item Description

Auto

(factory default)

Automatically identifies input digital video signals.

Colour-1 Digital Component Video signals (4:2:2) locked

Colour-2 Digital Component Video signals (4:4:4) locked

Colour-3 Digital RGB signals locked

Plasma Television (rear view)

HDMI equipment

HDMI cable having the HDMI mark

(commercially available.)

PDP507XDE.book Page 58 Friday, June 2, 2006 3:07 PM

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 217 218

Comments to this Manuals

No comments

Pioneer PDP-507XD User Manual Page 58

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-507XD