Pioneer Plasma Display Panel PDP-504CMX User Manual

PDP-504CMX Plasma Display Panel RS-232C Commands COMMAND PROTOCOL MANUAL Manual Version 1.00 November 3, 2004 Pioneer Corporation Pioneer

8RS-232C Adjustment ModeGRA GRADATION: ####### Displays the current GRADATION setting ¶GRAS01 GRADATION: GAMMA 2.0 Sets GRADATION to ‘GAMMA 2.0’.

9RS-232C Adjustment ModeMIR MIRROR MODE: ### Displays the current MIRROR MODE setting. ¶MIRS00 MIRROR MODE: OFF Turns the MIRROR MODE OFF (normal disp

10RS-232C Adjustment ModeSSI ######### Displays the current sub screen input function. ¶¶SSIS01 INPUT1(SUB) Switches the sub screen to INPUT1. ‡‡SSI

11RS-232C Adjustment Mode5.5.6 GET CommandsWhat are GET commands?• They are commands for outputting TXD such as adjustment data from the internal micr

12RS-232C Adjustment Mode2) <GPI> (GET PICTURE DATA: Gets integrator/PICTURE data.)Order Data contents Size Remarks1 CONTRAST 3 Byte #2 BRIGHTN

13RS-232C Adjustment Mode5) <GSS> (GET STATUS SETUP: Gets menu and integrator SETUP data.)OrderData contents Size Output Remarks1 GRADATION 1 By

14RS-232C Adjustment Mode6) <GSO> (GET STATUS OPTION: Gets menu and integrator OPTION data.)OrderData contents Size Output Remarks1 ENERGY SAV

RS-232C Adjustment Mode  Check Sum This is data to which 2-Byte ASCII code is added to a data group returned by a GET command. PC side STX ID GET

PDP-504CMX RS-232C Command Protocol Manual Pioneer Electronics (USA) Inc. Industrial Solutions Business Group 2265 Ea

This manual is copyrighted with all rights reserved. No part of this document may be reprinted, produced, translated or utilized in any form or by any

1RS-232C Adjustment Mode5.5 RS-232C Adjustment ModeThis display has a RS-232C terminal. It is possible to use a PC to make various adjustments and set

2RS-232C Adjustment Mode5.5.2 Interface1) ConnectorD-sub 9 pins (male)2) Pin layout3) Baud Rate9600 bps (standard)(switch-able to 1200, 2400, 4800,

3RS-232C Adjustment Mode5.5.3 ID AssignmentAfter connecting to the PC, an ID is assigned. The ID is assigned from the PC.Commands: <IDC> (ID CL

45.5.4 Combination ConnectionWhen performing control and adjustment, it is convenient to connect several sets to one PC.By performing a combination co

5Under the connection conditions shown below, operation using a combination cable is assured up to 16 sets.Conditions: 1 Length of RS-232C cable conne

6RS-232C Adjustment Mode5.5.5 List of RS-232C CommandsHow to read this Table• RS-232C adjustment validity : Indicates whether or not the RS-232C a

7RS-232C Adjustment ModeCTR CTI: ### Displays the current CTI setting. ¶CTRS00 CTI: OFF Sets CTI to OFF. ‡CTRS01 CTI: ON Sets CTI to ON. ‡[D]DIN Turns