28
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ Zone 2
Setting Item Default Value Setting Details
Output Level Fixed Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Volume Limit Off Set the maximum value for Zone 2 to avoid too
high volume. Select "Off" or a value between "−32
dB" and "+17 dB".
Power On Level Last Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "− dB", and "−
81.5 dB" to "+18.0 dB".
•
You cannot set a higher value than that of
"Volume Limit".
Bass 0 dB Adjust the volume of the bass for Zone 2. Select a
value between "−10 dB" and "+10 dB".
Treble 0 dB Adjust the volume of the treble for Zone 2. Select a
value between "−10 dB" and "+10 dB".
Balance 0 Set the left-right balance for Zone 2. Select a
between "L + 10" to "R + 10".
■ Zone 3
Setting Item Default Value Setting Details
Output Level Fixed Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Volume Limit Off Set the maximum value for Zone 3 to avoid too
high volume. Select "Off" or a value between "−32
dB" and "+17 dB".
Power On Level Last Set the Zone 3 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "− dB", and "−
81.5 dB" to "+18.0 dB".
•
You cannot set a higher value than that of
"Volume Limit".
Bass 0 dB Adjust the volume of the bass for Zone 3. Select a
value between "−10 dB" and "+10 dB".
Treble 0 dB Adjust the volume of the treble for Zone 3. Select a
value between "−10 dB" and "+10 dB".
Balance 0 Set the left-right balance for Zone 3. Select a
between "L + 10" to "R + 10".
Comments to this Manuals